NS-200FT
Industrial 10/100 BaseT to 100 BaseFT Fiber Optical Converter *For Multi Mode Use* Supports operating temperatures from -25 to 75°C. Replaced with NS-200AFT-T
Features
The NS-200FT has officially been phased out and will no longer be available. It has now been replaced by NS-200AFT-T.
The NS-200FT is a Ethernet(10/100Base-TX) to Fiber Optic(100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function.
The NS-200FT operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125μm fiber cables; in half duplex mode, range is 412m with 62.5/ 125μm fiber cables.
It contains "soft start" function with overload protection, high-low voltage protection.
The width of the NS-200FT is just 32.30 mm, so it can be used where space is important.
- Automatic MDI / MDI-X crossover for plug-and-play
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 1.4Gbps high performance memory bandwidth.
- Frame buffer memory : 512 Kbit
- Integrated look-up engine with dedicated 1 K unicast MAC addresses.
- MTBF = 438,000 hours ( Temperature is 25 °)
- MTBCF = 525,600 hours ( Temperature is 25 °)
- Supports +10~+30Vdc voltage
Reverse Polarity Protection - Supports operating temperatures from 0 ~ +70°C
- DIN rail mount for industrial usage
Specifications
| Analog Input | |
| Input Channels | 8 differential |
| Input Type | +/-500mV, +/-1V, +/-5V, +/-10V +/-20mA (requires optional external 125ohm resistor) |
| Resolution | 16-bit (Normal Mode) / 12-bit (Fast Mode) |
| Sampling Rate | 10 samples/ second (Normal Mode) / 60 samples/ second (Fast Mode) total |
| Accuracy | +/-0.1% (Normal Mode) / +/-0.5% (Fast Mode) or better |
| Band Width | 15.7Hz (Normal Mode) / 78.7Hz (Fast Mode) |
| Zero drift | +/-20uV/°C |
| Span drift | +/-25ppm/°C |
| Input Impedance | 2M Ohms |
| Common Mode Rejection | 86dB min. |
| Normal Mode Rejection | 100dB |
| Over Voltage Protection | 240 Vrms |
| 4KV ESD Protection | Yes, Contact for each terminal. |
| Intra-module Isolation, Field to Logic | 3000 VDC |
| Interface | |
| Interface | RS-485 |
| Format | N, 8, 1 |
| Baud Rate | 1200 ~ 115200bps |
| LED Display | |
| 1 LED as Power/ Communication indicator | |
| Power | |
| Input | +10 to +30 Vdc |
| Power Consumption | 1.3W |
| Protocol | |
| Support Modbus and DCON Protocol | Yes |
| Environment | |
| Operating temperature | -25 to 75°C |
| Storage temperature | -40 to 85°C |
| Humidity | 5 to 95% RH, non-condensing |
References and Support
Customer Reviews (0)
Be the first to leave a review.
Product Added to Cart
...
$359.00 Each
Quantity added:
