| Remote Ethernet I/O |
ET-7000 are remote web-based Ethernet I/O modules that feature a built-in web server. They can be connected to a PC via Ethernet communication. They allow configuration, I/O monitoring and I/O control through a regular web browser. Remote control is as easy as surfing the Internet.
|
|
Remote RS-485 I/O
|
I-7000 distributed I/O modules are available in a bevy of Digital and Analog configurations, which are communicable via RS-485, as well as capable of interfacing with ICP DAS's own proprietary DCON software interface. The I-7000 series are the ultimate selection in Remote I/O Data Acquisition Modules.
|
| I-8017HW |
I-8017HW: 14-bit 100K sampling rate 8/16-channel analog input module red Article
|
| Remote Modbus RTU I/O |
Our M-7000 Modbus RTU Remote I/O line is identical to the RS-485 I-7000 family, but capable of communication via ModBus protocol! The ICP DAS M-7000 distributed I/O modules are available in a wide variety of Analog and Digital configurations. The entire M-7000 family directly correlates to the existing I -7000 product line, thus offering, full digital and analog data acquisition capability!
|
| PCI Data Acquisition |
Our PCI Data Acquisition boards offer cutitng edge data acquisition capabilities for your industrial control needs. The ICP DAS DIO and PCI data acquisition boards are available in a bevy of digital and analog configurations, which are communicable via standard PC-104 slots, as well as capable of interfacing with other modules and devices via alternate communication protocols.
|
| I-8024W |
I-8024W is a 4-channel 14-bit analog output module | |
Dear Maria Santella,
PC based control is the cost-effective way to go when you're on a limited budget. Expand on your PC Based Control System with expansion I/O racks and remote I/O available in USB, Profibus, CAN, Modbus RTU, Modbus TCP, RS-485, communication.
ICP DAS USA provides a great variety of products with modular and universal solutions for your applications and projects.
|
|
USB Expansion Racks
USB-87Pn: USB Expansion Rack with 1/2/4/8 Slots
 Our USB-87Pn Series intelligent I/O expansion unit has a USB communication interface, is hot swappable, and can expand its functions with any kind of i-87K series (High profile) module. It used for industrial monitoring and controlling applications. There are more than 30 I/O modules supported with the unit, including analog input/output, digital input/output, and counter/frequency I/O modules.
|
|
Modbus I/O Expansion Racks
I-8000 Modbus RTU and TCP Expansion Racks
 Modbus is a protocol in the industrial manufacturing and environment monitoring fields. It's easy to expand a PC's I/O capabilities with a Modbus I/O Expansion Rack. It suits master-slave or query-response distributed I/O applications. The units have pre-installed a Modbus firmware. PC's, HMI's or PLC's can use Modbus/TCP and Modbus/RTU protocol to communicate with I/O modules in the unit via the RS-232/485 or Ethernet interface.
|
|
Profibus I/O Expansion Racks
PROFIBUS Remote I/O Unit with 4 Expansion Slots
 PROFI-8455 Remote I/O Unit is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 4 slots for ICPDAS I-87K Low Profile and I-87K High Profiles series I/O modules. PROFI-8455 has a hot-swap function for changing I/O modules. To setup networks, users can choose and configure I/O modules by using the GSD file without any other setting tools.
|
 |
|
DeviceNET I/O Expansion Rack
DeviceNET I/O Unit with 4 Expansion Slots
 I-8420 allows direct peer to peer data exchange between nodes in an organized and, if necessary, deterministic manner. DeviceNet defines a connection-based scheme to facilitate all application communications. A DeviceNet connection provides a communication path between multiple endpoints ICP DAS also presents an I-8420 Utility tool to allow users to configure and create the EDS file for specific plugged in I/O modules. Users can easily apply the I-8420 embedded controller in the DeviceNet network.
|
|
|
CANopen I/O Expansion Rack
CANopen Embedded Device with 4 I/O Slots
 I-8421 is designed for slave devices of CANopen protocol. It follows the CANopen Spec DS-301 V4.01 and DSP-401 V2.1, and supplies many features such as: dynamic PDO, EMCY object, error output value, SYNC cyclic and acyclic. In order to expand I/O channel's flexiblity, I-8421 supports up to 4 slots for I/O expansion and is suitable with a lot of ICP DAS DI/AI/DO/AO modules
|
|
I-8037W
16 Channel Isolated Open Collector Output Module
I-8037W is a 16-channel Isolated Open Collector Output Module. The maximum load is 100 mA per channel. It has 16 LEDs as digital output indicators. It has 1 LED as a power indicator.
| |
