20-Port 10/100/1000 Base-T + 4 Combo 100/1000 TP/SFP Port + 2 SFP Port L2 Managed Switch, supports operating temperatures from 0°C ~ 50°C

MSM-6226G

20-Port 10/100/1000 Base-T + 4 Combo 100/1000 TP/SFP Port + 2 SFP Port L2 Managed Switch, supports operating temperatures from 0°C ~ 50°C

  Price:  $899.00  

Features

MSM-6226 applicationMSM-6226G is a L2 Managed Switch that meets all IEEE 802.3ab/u/x/z Gigabit, Gigabit Ethernet and Ethernet specifications. It provides 20 gigabit Ethernet ports (10/100/1000 Mbps TP) , 4 combo TP/SFP ports and 2 SFP ports.

The switch can be managed through a RS-232 serial port via direct connection, or through an Ethernet port using a Telnet or Web-Based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon to the switch to monitor, configure and control each port activity in a user-friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features comprehensive and useful functions such as DHCP Option 82, QoS (Quality of Service), Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security, SNMP/RMON and IGMPv3 Snooping capability via the intelligent software. It is suitable for both Metro-LAN and office applications.

The switch also supports power saving for reducing the power consumption with its Power Management technique. It could efficiently save the switch power with automatically detecting the client idle and cable length to provide different power.

  • IEEE 802.3ab 1000BASE-T Gigabit Ethernet
  • L2+ features provide better manageability, security, QoS, and performance
  • IPv6 and s-Flow supports
  • Supports IGMPv3 snooping and IGMP Proxy
  • IEEE 802.3z Gigabit Ethernet
  • Dual speed SFPs for FE or GbE fiber uplink
  • 802.3az Energy Efficient Ethernet standard
  • Port Mirroring helps supervisor monitoring network

Reference & Support

Specifications

Technology
Standards
Port Mirroring helps supervisor monitoring network
IEEE 802.1Q tag-base VLAN for performance
IEEE 802.1X Access Control improve network security
IEEE 802.1D Compatible, IEEE802.1w Rapid Spanning Tree & IEEE802.1s Multiple Spanning Tree
IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3
Unknown Unicast/Broadcast/Multicast storm control
IP-MAC-Port binding for LAN security
QCL Based on Application traffic for QoS and rate limitation management
Support IGMPv3 snooping and IGMP Proxy
Support DHCP snooping (DHCP option 82)
ACL Based on Ethernet Type/ARP/IPv4 for packets permit or deny, rate limitation and port copy
Support "power saving" for Green Ethernet requirement
Support LLDP (Link Layer Discovery Protocol) provides a standards-based method for enabling switches to advertise themselves.
MAC Addresses 8K
Processing Type store & forwarding
Memory Bandwidth Bandwidth: 52Gbps
Frame Buffer Memory 4Mbits
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET, SNMP, IGMP, IEEE802.1X, LLDP/SNMPv1/v2c/v3
MIB MIB-II, Ethernet-like MIB , Bridge MIB,RMON MIB statistics Group 1,2,3,9
Interface
RJ-45 Ports 20 ports 10/100/1000 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
UTP/SFP Combo 4 ports combo 100/1000 BAST-T/SFP slots
SFP 2 ports 100/1000Mbps SFP Fiber Module slots
LED Indicators POWER, TP Port LED , SFP Port LED
Ethernet Isolation 2KVDC Isolation
Serial Port RS-232 (TxD, RxD and GND); Non-isolation
Frame Ground for EMS Protection EMS Requirements:
IEC-61000-4-2 IEC-61000-4-3 IEC-61000-4-4 IEC-61000-4-5 IEC-61000-4-6 IEC-61000-4-8 IEC-61000-4-11
Power
Input Voltage Range Voltage: 100 ~ 240 VAC
Power Consumption 15.61 W
Frame Ground for EMS Protection Yes
Mechanical
Casing Metal
Environmental Rating IP20
Dimensions (W x L x H ) 442mm x 170mm x 44mm
Installation Wall mounting, 19'' rackmountable,brackets included
Environmental
Operating Temperature 0 °C ~ 50 °C
Environmental Rating -20 °C ~ 70 °C
Ambient Relative Humidity 10 % ~ 90 % RH

Related Products