Download Now

Enter your information or login to view the document.


×
8 Port 10 /100 Base T Managed Switch with Metal case, FC connector, Single Mode

MSM-508FCS-40T

8 Port 10 /100 Base T Managed Switch with Metal case, FC connector, Single Mode

  Price:  $1,499.00  

Fastest Delivery: (Details) X Delivery Details
We ship via UPS and fastest delivery is with Next Day Air. UPS Next Day Air Early typically gets their product to them as early as 8am, Next Day Air gets their product typically there by 10:30am and Next Day Air Saver typically by 3pm. We ship same day for in stock items and the lead time is up to one week for out of stock items. Delivery is dependent on UPS and your shipping method.
ADD TO CART
ADD TO CART
BUY BY 1-CLICK

References & Support


Features

  • Automatic MDI/MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • Supports wide operating temperatures from -30°C ~ +75°C
  • Built-in Cyber-Ring redundant technique
  • Redundant Dual Power Inputs +12 VDC ~ +48 VDC
  • Power failure alarm by relay output
  • Modbus remote monitoring
  • Supports Modbus OPC Server
  • Store-and-forward architecture
  • Frame buffer memory: 1 Mbit
  • 2048 MAC addresses
  • 3.2 Gbps high performance memory bandwidth
  • Single-mode 40Km, SC Connector Fiber supports
  • DIN-Rail Mounting or Wall Mounting

CE FCC RoHS WEEE

Introduction

The MSM-508FCS-40T is an 8-port Industrial Ethernet Layer 2 Managed Switch with 2-Fiber Port that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.

It can be managed through RS-232 port via serial console or Ethernet port using telnet or Web browser. In addition, the switch supports a lot of powerful managed functions, such as 802.1Q Tag-based VLAN, Portbased VLAN, 802.1p QoS (Quality of Service), Port Trunking, Spanning Tree, Cable Testing and Port Mirroring.

Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically it detects and recovers from a fiber or copper link failure within approximately 20 ms V for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet and fiber port with Modbus or OPC protocol.

MSM-508F provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the it's power needs. And the relay output facility can deliver warning signal while power or network link failure.

Specifications

LED Indicators
Status 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port)
Ethernet
Ports 6 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Addresses 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET
Redundant Strategy STP, Ring (ICP DAS)
Isolation 1500 Vrms 1 minute
DIP Switch Yes, Normal Run / Repair Mode
Fiber
Ports 2-port 100 Base-FX
SC connector
Mode Single-Mode
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 µm
Distance 40 km, (9/125 µm recommended) for full duplex
Wavelength 1300 or 1310 nm
TX Output -5 dBm Min.
0 dBm Max.
RX Sensitivity -35 dBm
Digital Input
Channels 3
Type Wet Contact
ON Voltage Level +19 VDC ~ +30 VDC
OFF Voltage Level +11 VDC Max.
Digital Output
Channels 3
Type Open Collector
Sink/Source (NPN/PNP) Sink (NPN)
Load Current 30V/100 mA Max.
COM Ports
Ports 1 x RS-232 (Console)
1 x RS-485
Power
Reverse Polarity Protection Yes
Input Range +12 VDC ~ +48 VDC Redundant Dual Inputs (Non-isolated)
Redundant Power Inputs Yes
Consumption 0.3 A @ 24 VDC
Alarm Contact Yes,Relay 2 A @ 30 VDC
Mechanical
Casing Metal
Dimensions (mm) DIN-rail mounting: 47 x 175 x 142 (W x L x H)
Wall mounting: 51 x 190 x 142 (W x L x H)
Installation DIN-rail mounting or wall mounting
Ingress Protection Rating IP30
Environmental
Operating Temperature -30 ~ +75°C
Storage Temperature -40°C ~ +85°C
Humidity 10 ~ 90% RH, non-condensing

References and Support

Customer Reviews (0)

Be the first to leave a review.

Recently Viewed Items

×

Write a Review

Name


E-mail


Phone


Rating: out of 5 Stars
Review (max 1000 characters)

characters left