MSM-508
8-Port 10/100 Base-T Industrial Ethernet Managed Switch with metal case.
References & Support
Features
The MSM-508 is an 8-Port Industrial Ethernet (10/100Base-TX) Layer 2 Managed Switch. MSM-508 supports 10/100 M auto-negotiation feature and auto MDI /MDI-X function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The Ethernet port connectors are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.
It can be managed through the RS-232 port via serial console or Ethernet port using telnet or Web browser. In addition, the switch supports a lot of powerful managed functions, such as 802.1Q Tag-based VLAN, Port-based VLAN, 802.1p QoS (Quality of Service), Port Trunking, Spanning Tree, Cable Testing and Port Mirroring. Built-in ICP DAS Cyber-Ring techniques enable multiple switches to be placed into a redundant ring. The switch detects and recovers from a fiber or copper link failure within approximately 50ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet port with Modbus or OPC protocol.
MSM-508 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the MSM-508's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.
|
 |
Specifications
| Technology | |
| Standards | IEEE 802.3, 802.3u and 802.3x |
| Processing Type | Store & forward, wire speed switching |
| MAC Addresses | 2048 |
| Memory Bandwidth | 3.2 Gbps |
| Frame Buffer Memory | 1 Mbit |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Protocol | VLAN, QoS, Port Trunk, SMTP, TELNET, SNMP |
| Interface | |
| RJ-45 Ports | 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| LED Indicators | Power, 10/100M, Link/Act, Master |
| Ethernet Isolation | 1500 Vrms 1 minute |
| COM1 | RS-232 (TXD, RXD and GND); Non-isolation |
| COM2 | RS-485 (D2+, D2-; self-tuner ASIC inside); Non-isolation |
| Frame Ground for EMS Protection | Yes |
| Digital Input/Output | |
| Digital Input | 3-channel, Wet Contact, L: +11 VDC Max., H: +19 VDC ~ +30 VDC |
| Digital Output | 3-channel, Open Collector, Sink/NPN, 30V/100 mA Max. |
| Power | |
| Input Voltage Range | +12 VDC ~ +48 VDC (Non-isolation redundant input) |
| Power Consumption | 0.25 A @ 24 VDC, +/-5% arrowed with 100M Full duplex |
| Protection | Power reverse polarity protection |
| Frame Ground for EMS Protection | Yes |
| Connection | 20-Pin Removable Terminal Block |
| Mechanical | |
| Casing | Metal |
| Environmental Rating | IP30 Protection |
| Dimensions | 47 mm x 128 mm x 175 mm (W x L x H) |
| Includes Cable | CA-090510 x 1 |
| Installation | DIN-Rail or Wall mounting |
| Environmental | |
| Operating Temperature | -40 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |
References and Support
Customer Reviews (0)
Be the first to leave a review.
Product Added to Cart
...
$779.00 Each
Quantity added:
