M-7084
4/8-channel Counter/Frequency/Encoder Input Module, communicates over RS-485 with Modbus RTU and DCON protocol, Operating Temperature -25 ~ +75°C
Features
The M-7084 is a 32-bit high-speed Counter/Frequency/Encoder input module that offers a variety of mode options, including "Up Counter”, "Frequency Input", "Up/Down Counter", "Direct/Pulse Counter" and "A/B Phase Counter" modes. The mode combinations can be individual set for all 8 channels, where some channels can be set to “Up Counter” mode and other channels can be simultaneously set to “Frequency”, "Up/ Down Counter" or “Encoder input” mode. The built-in digital fi lter can fi lter out noise where the high/ low pulse width is smaller than the minimum high/low width of the digital filter. The M-7084 provides a virtual battery backup function in counter mode.
- 8 Up Counter/Frequency Channels or 4 Encoder Input Channels
- Programmable Digital Filter
- 32-bit Counter
- Individual Channel Configuration
- Virtual Battery Backup to Preserve Counter Values
- +/-4 kV ESD Protection
- Preset Values for Counter Input
- RoHS Compliant
- Wide Operating Temperature Range: -25 ~ +75°C
Counter Measurement, Frequency Measurement and Encoder Motion Control.
Specifications
Communication | |
Interface | RS-485 |
Format | N, 8, 1 |
Baud Rate | 1200 ~ 115200 bps |
Protocol | Modbus RTU, DCON |
Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) |
LED Indicator | |
Power | 1 LED, Red |
Isolation | |
Intra-module Isolation, Field-to-Logic | 3000 VDC |
EMS Protection | |
ESD (IEC 61000-4-2) | +/-4 kV Contact for Each Terminal |
EFT (IEC 61000-4-4) | +/-4 kV for Power |
Surge (IEC 61000-4-5) | +/-3 kV for Power Line |
Power | |
Reverse Polarity Protection | Yes |
Input Range | 10 ~ 30 VDC |
Consumption | 1.32 W Max. |
Mechanical | |
Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm |
Installation | DIN-Rail or Wall Mounting |
Environment | |
Operating Temperature | -25 ~ +75°C |
Storage Temperature | -30 ~ +80°C |
Humidity | 10 ~ 90% RH, Non-condensing |
I/O Specifications
Counter/Frequency/Encoder Input | |
Channels | 4-channel Up/Down Counter (CW/CCW) 4-channel Dir/Pulse Counter (Bi-direction) 4-channel A/B Phase (Quadrant Counting) 8-channel Up Counter 8-channel Frequency |
Contact | Wet |
Sink/Source (NPN/PNP) | Sink |
Types | Counter, Frequency or Encoder |
Counter/Encoder-bits | 32-bit (4,294,967,295) |
On Voltage Level | +3.5 VDC ~ +30 VDC |
Off Voltage Level | +1 VDC Max. |
Programmable Digital Filter | 1 ~ 32767 μs |
Individual Channel Confi guration | Yes |
Counter Mode | Up or Up/Down |
Encoder Mode | CW/CCW, Dir/Pulse, AB Phase |
Frequency Mode | Yes |
Max. Speed | 3.5 VDC ~ 10 VDC: 200 kHz 10 VDC ~ 30 VDC: 150 kHz |
Frequency Accuracy | ±0.4% of Input Frequency |
Virtual Battery Backup to preserve Counter Values | Yes |