M-7024R
4-channel Voltage Output, Current Output, Analog Output (0 ~ 5 V, +/- 5 V, 0 ~ 10 V, +/- 10 V, 0 ~ 20 mA, 4 ~ 20 mA) and 5-channel Digital Input Module with DCON and Modbus Protocol, communicable over Modbus RTU and RS-485, supports operating temperatures between -25 ~ +75°C
References & Support
Features
The M-7024R is a 14-bit 4-channel analog output module that provides current and voltage outputs. There are options for power-on values and safe values. It features 3000 VDC intra-module isolation.
The M-7024R is the same as the I-7024 and provides additional 5-channel digital inputs and 4 KV ESD protection on each terminal.
The M-7024R support Modbus RTU and DCON protocols and can be configured via software. Their hardware specifications are the same as those of the I-7024/I-7024R.
- 4-channel Analog Output
- 5-channel Digital Input for I-7024R/M-7024R
- Software Selectable Current or Voltage Output
- 14-bit Resolution
- Power-on Value Setting
- Safe Value Setting
- 3000 VDC Intra-Module Isolation
- Programmable Output Slope
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75°C
Applications
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
Specifications
Analog Output | ||
Output Channels | 4 | |
Range | 0 ~ 5 V, +/- 5 V, 0 ~ 10 V, +/- 10 V, 0 ~ 20 mA, 4 ~ 20 mA | |
Resolution | 14-bit | |
Accuracy | 0.1% | |
DA Output Response Time | 10 ms | |
Open Wire Detection (for current only) |
- | |
Channel to Channel Isolation | - | |
Power-on Value | Yes | |
Safe Value | Yes | |
Digital Input | ||
Channels | 5 | |
Input Type | Dry Contact (Source) | |
Contact Level | On Voltage Level | Close to GND |
Off Voltage Level | Open | |
Counters | Max. Count | 16-bit (65535) |
Max. Input Frequency |
50 Hz | |
Min. Pulse Width | 10 ms |
System Specifications
Communication | |
Interface | RS-485 |
Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
Baud Rate | 1200 ~ 115200 bps |
Accuracy | Modbus RTU, DCON |
Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) |
LED Indicator/Display | |
System LED Indicator | Yes, 1 LED as Power/Communication Indicator |
I/O LED Indicator | - |
7-Segment LED Display | - |
Isolation | |
Intra-Module Isolation, Field-to-Logic |
3000 VDC |
EMS Protection | |
ESD (IEC 61000-4-2) | +/-4 kV |
EFT (IEC 61000-4-4) | +/-4 kV |
RS (IEC 61000-4-3) | 5 V/m, 80 MHz ~ 1GHz |
Power | |
Reverse Polarity Protection | Yes |
Input Range | 10 ~ 30 VDC |
Consumption | 3.2 W |
Mechanical | |
Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm |
Installation | DIN-Rail or Wall Mounting |
Environment | |
Operating Temperature | -25 ~ +75°C |
Storage Temperature | -40 ~ +85°C |
Humidity | 10 ~ 95% RH, Non-condensing |