M-7024L
12-bit 4-channel Analog Output Module using the DCON and Modbus Protocol
References & Support
Features
The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.
- Software Selectable Current or Voltage Output
- Power-on Value Setting
- Safe Value Setting
- 3000 VDC Intra-module Isolation
- Programmable Output Slope
- Dual Watchdog
- Wide Operating Temperature Range: -25 to +75°C
Specifications
Analog Output | |
Output Channels | 4 |
Output Type | 0~20mA, 4~20mA, 0~5V, +/-5V, 0~10V, +/-10V |
Resolution | 12-bit |
Accuracy | +/-0.1% of FSR |
Zero Drift | Voltage output : +/-30uV/°C |
Current output : +/-0.2uA/°C | |
DA Output Response Time | 10ms per channel |
Span Temperature Coefficient | +/-20ppm/ °C |
Programmable Output Slope | 0.125 to 2048 mA/ second 0.0625 to 1024 V/ second |
Current load resistor | External +24V power : 1050Ohms |
Intra-module Isolation, Field to Logic | 3000 VDC |
Interface | |
Interface | RS-485 |
Format | N, 8, 1 |
Baud Rate | 1200 ~ 115200bps |
LED Display | |
1 LED as Power/ Communication indicator | |
Power | |
Input | +10 to +30 Vdc |
Power Consumption | 2.4W |
Protocol | |
Modbus RTU, DCON | Yes |
Environment | |
Operating temperature | -25 to 75°C |
Storage temperature | -40 to 85°C |
Humidity | 5 to 95% RH, non-condensing |