M-7018Z-G/S
10 Channel Analog Input Data Acquisition Module, supports Current Input, Voltage Input and Thermocouple Input. Communicable over Modbus RTU and RS-485 with High Over Voltage Protection and cable. Supports operating temperatures between -25 to 75°C (-13F ~ 167F). Includes DB-1820 Daughter Board.
Features
The M-7018Z is a 10-channel voltage and current thermocouple input data acquisition module. It is communicable over Modbus RTU and RS-485 with High Over Voltage Protection. Supports operating temperatures between -25 to 75°C (-13F ~ 167F). M-7018Z comes with a DB-1820 Daugther Board that supports Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA software and PLCs.
- Indication LED Light
- For power and communication
- Over voltage protection for M-7018R: 240Vrms
- Supports Modbus RTU and DCON Protocol
- 8 differential Analog Input Channels
- Analog Input Types: mV, V , mA
- Thermocouple: Type J, K, T, E, R, S, B, N, C
- Din Rail Mount
Specifications
| Analog Input | |
| Input Channels | 10 Differential |
| Input Type | +/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V +/-20mA, 0~20mA, 4~20mA (Requires Optional External 125 Ohm Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710) |
| Resolution | 16-bit |
| Sampling Rate | 10 Samples/Sec (Total) |
| Accuracy | +/- 0.1 % |
| -3dB BandWidth | 15.7 Hz |
| Zero Drift | +/- 0.5 μV/°C |
| Span Drift | +/- 25 ppm/°C |
| Common Mode Rejection | 150 dB |
| Normal Mode Rejection | 100 dB |
| Input Impedance | >500k Ohms |
| Over voltage Protection | 240 Vrms |
| Open Thermocouple Detection | Yes |
| Individual Channel Configuration | Yes |
| Intra-module Isolation, Field to Logic | 3000 VDC |
| Interface | |
| Interface | RS-485 |
| Format | N, 8, 1 |
| Baud Rate | 1200 ~ 115200 bps |
| DB-1820 (3.81mm pitch) | |
| Wire Strip Length | 4 ~ 5 mm |
| Wire Range | 16 ~ 24 AWG |
| DN-1822 (5.08mm ptich) | |
| Wire Strip Length | 4 ~ 5 mm |
| Wire Range | 14 ~ 24 AWG |
| LED Display | |
| 1 LED as Power/Communication Indicator | |
| Power | |
| Input | +10 ~ +30 VDC |
| Power Consumption | 1.0W |
| Protocol | |
| Support Modbus and DCON Protocol | Yes |
| Environment | |
| Operating Temperature | -25 ~ 75 °C |
| Storage Temperature | -40 ~ 85 °C |
| Humidity | 5 ~ 95% RH, Non-condensing |
Thermocouple Type
| Type | Range°C |
| J | -210 ~ +760 |
| K | -270 ~ +1372 |
| T | -270 ~ +400 |
| E | -270 ~ +1000 |
| R | 0 ~ +1768 |
| S | 0 ~ +1768 |
| B | 0 ~ +1820 |
| N | -270 ~ 1300 |
| C | 0 ~ 2320 |
| L | -200 ~ +800 |
| M | -200 ~ +100 |
| L (DIN43710) | -200 ~ +900 |
References and Support
Customer Reviews (0)
Be the first to leave a review.
×
Product Added to Cart
Product Added to Cart
...
$569.00 Each
Quantity added:
Related Products
