Project Name |
Description |
I/O Boards Or Complex Equipment Used |
Demo_01 |
Timer Control |
Push4Key,
Show3Led |
Demo_01a |
To do something at some sec later when an event happens |
Push4Key,
Show3Led |
Demo_02 |
Start, Stop, & Reset Timer |
Push4Key,
Show3Led |
Demo_03 |
R/W System Date & Time
To output at a scheduled time interval, For ex. Moday, 09:00 ~ 18:00, Sunday, 10:00 ~ … |
|
Demo_04 |
Calculate Empty Cycle Time |
|
Demo_05 |
Blinking Output |
Push4Key,
Show3Led |
Demo_06 |
Change Output Mode |
Push4Key,
Show3Led |
Demo_07 |
Show A Value To S-MMI |
Push4Key,
Show3Led |
Demo_08 |
Input A Value To S-MMI |
Push4Key,
Show3Led |
Demo_09 |
Integer Calculation |
|
Demo_10 |
Display Analog Input Value To S-MMI |
I-87017,
I-87024,
Push4Key |
Demo_11a |
Fbus Master, NET_ID = 1 |
Fbus_m,
Push4Key,
Show3Led |
Demo_11b |
Fbus Slave, NET_ID = 2 |
Fbus_s,
Push4Key |
Demo_12 |
Use COM3 To Receive User-Defined Command From PC |
Show3Led |
Demo_13 |
Send User-Defined Data To PC Via COM3 Every 3 Seconds |
I-87017 |
Demo_14 |
Convert I-7000 & I-87xx Protocol To Modbus Protocol |
Bus7000 |
Demo_15a |
Link To Other Modbus Devices |
Mbus |
Demo_15b |
Simulate I-8417 As A Modbus Device For Demo_15a To Link To This Project |
None |
Demo_16 |
Periodic Pulse Generation, And Send Modbus Commands To Another Controller |
Push4Key,
Mbus |
Demo_17 |
Read / Write EEPROM |
|
Demo_18 |
PID control |
|
Demo_21 |
Write one string to Com5 & Com6 |
Push4Key,
Show3Led |
Demo_22 |
Receive message and echo back to Com5 or Com6 |
Show3Led |
Demo_23 |
Receive a user defined protocol from PC |
Show3Led |
Demo_27 |
Motion x, slot 0: I-8091,
Slot 1 : I-8090, NapdosISaGRAF8000Drivermotion.pdf |
I-8091
I-8090
Show3Led |
Demo_27a |
Motion x, slot 0 : I-8091,
NapdosISaGRAF8000Drivermotion.pdf |
I-8091a
Show3Led |
Demo_28 |
Motion x-y, slot0 : I-8091, slot1 : I-8090,
NapdosISaGRAF8000Drivermotion.pdf |
I-8091
I-8090
Show3Led |
Demo_29 |
Store 1200 short-int values every 75 sec. and then send to PC via Com3 |
I-87017 |
Demo_30 |
Store 2880 short-int values every 18 sec. and then send to PC via Com3 |
I-8017h |
Demo_31 |
Press push button 1 to send an email from Com4 of I-8xx7 controller |
Push4Key |
Demo_32 |
Press Push button 1 or 2 or 3 to send emails to two users with multi-buffers |
Push4Key |
Demo_33 |
R/W user defined protocol via Com3 |
Show3Led |
Demo_34 |
ISaGRAF Spotlight Demo |
Push4Key
Show3Led |
Demo_35a |
Time Synchronization : SA
Update Date & Time at this controller will sychronize date & time at SB |
Fbus_m |
Demo_35b |
Time Synchronization : SB |
Fbus_s |
Demo_36 |
Get driver version of I-8xx7 |
|
Demo_37 |
Spotlight demo |
Push4Key
Show3Led |
Demo_38 |
I-8xx7 talks to the MMICON : Demo 1 |
MMICON |
Demo_39 |
8xx7 talks to the MMICON : Demo 2 |
MMICON |
Demo_40 |
store 8 A/I (binary) to S256 per min, then PC can load it by "ICPDAS UDloader" |
I-8017h
S256_512
Show3Led |
Demo_41 |
Record Alarm (text) to S256/512 & PC can load it by "ICPDAS UDloader" |
S256_512
Show3Led |
Demo_42 |
store 8 A/I (text) to S256 per min, then PC can load it by "ICPDAS UDloader" |
I-8017h
S256_512
Show3Led |
Demo_43 |
SMS demo, Please declare your own phone No. in the dictionay, message type |
SMS
Show3Led
Push4key |
Demo_44 |
Demo of PC to download data to the S256/512 |
Show3Led |
Demo_46 |
Motion control :
Pulse move at a specified speed |
I-8091
I-8090
Push4Key |
Demo_49a |
Redundant : 8437/8837 redundant Master |
Bus7000
Ebus_m |
Demo_49b |
Redundant : 8437/8837 redundant slave |
Bus7000
Ebus_s |
Demo_50 |
PWM I/O demo. (Pulse Width Modulation) |
I-8055 |
Demo_52 |
Parallel D/I counter demo 1 at slot 0 (Counter Value is retained in this demo) |
I-8051
Push4Key |
Demo_53 |
Parallel D/I counter demo 2 at slot 0 (high speed near 1K) (Not retained) |
I-8051
I-8056
Push4key |
Demo_54a |
Modbus Master |
Mbus
Push4key |
Demo_54b |
Modbus Slave |
|
Demo_55 |
PWM I/O demo 2. (Pulse Width Modulation) |
I-8055 |
Demo_58 |
Stepping motor controller |
Push4key
I-8041 |
Demo_59 |
Stepping motor controller |
Push4key
I-8041 |
Demo_61 |
DI counters using DI_CNT, 8xx7 + 8051
Do somethig when DI signal happens |
I-8051 |
Demo_63 |
PWM & DI_CNT demo, ON & OFF time can be dynamically changed |
I-8055 |
Demo_70 |
Send string to COM3 when alarm 1 to 8 happens (Access to variables as array) |
Slot 1 : I-8077 |