ISaGRAF IEC-61131-3 PAC with 8 I/O Slots.  Has Ethernet, RS-232, and RS-485 ports.  Supports programming in Ladder Logic, Structured Text, Function Block Diagram, Instruction List and Flow Chart.

IP-8847

ISaGRAF IEC-61131-3 PAC with 8 I/O Slots. Has Ethernet, RS-232, and RS-485 ports. Supports programming in Ladder Logic, Structured Text, Function Block Diagram, Instruction List and Flow Chart.

  Price:  $1,599.00  

Fastest Delivery: (Details) X Delivery Details
We ship via UPS and fastest delivery is with Next Day Air. UPS Next Day Air Early typically gets their product to them as early as 8am, Next Day Air gets their product typically there by 10:30am and Next Day Air Saver typically by 3pm. We ship same day for in stock items and the lead time is up to one week for out of stock items. Delivery is dependent on UPS and your shipping method.

Features

** ~ New ~ **

iP-8441-MTCP_la02 Model: iP-8441-MTCP

iP-8847-G_la04 Model: iP-8447-MTCP

The ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS. Each WP-8xx7 is equipped with an 80186, 80 MHz CPU running a MiniOS7 operating system, a variety of input/output ports (Dual 10/100 Base-TX Ethernet Ports for iP-8x47, one RS-232/485 port, one RS-485 port and two RS-232 ports) and a range of I/O slots (4/8) that can be used to integrate high performance parallel I/O modules (high profile I-8K Series) or serial I/O modules (high profile I-87K series). Users can also choose RS-485 Remote I/O modules (I-7000 series) or expansion units (RU-87Pn or I-87Kn) plugged with high profile I-87K serial I/O modules. Compared to I-8xx7, iPAC-8xx7 series is 2 ~ 4 times faster!

Highlight Information

  • 80186, 80 MHz CPU
  • MiniOS7 Inside
  • Development Software: ISaGRAF Ver.3
  • 512 KB Battery Backup SRAM to Retain Data
  • 64-bit Hardware Serial Number
  • 4/8 Hot-Swap Slots for I-87K High Profile I/O Modules
  • 4 Serial Ports (RS-232/485)
  • 64-bit Hardware Serial Number
  • Redundant Power Inputs
  • Operating Temperature: -25 ~ +75 °C

Software Feartures

  • MiniOS7 Embedded Operating System (DOS-like)
  • Embedded ISaGRAF Ver.3 SoftLogic
  • Support IEC 61131-3 Standard
  • Accepts max. 64 KB ISaGRAF code size

Hardware Feartures

  • 80186 CPU (16-bit & 80 MHz)
  • Dual Battery Backup SRAM (512 KB)
  • 64-bit Hardware Serial Number for Protection
  • 4/8 I/O Expansion Slots (support High Profile I/O Modules)
  • Support I/O Module Hot Swap
  • Dual 10/100M Ethernet Ports (for iP-8x47)
  • 4 Serial Ports (RS-232/485)
  • Redundant Power Inputs

Applications

faq-156-temperature-2 Measure Humidity and Temperature
Values via DL-100TM485

link-pm-213x-e ISaGRAF PAC connects the Smart Meter

ZigBee-Wireless-Solution.png ZigBee Wireless Solution

Note: Some of the applications don't support iP-8x17, please click the item for more details.

Click here for "Applications Supporting List" & all applications

Specifications

Models iP-8847
System Software
OS MiniOS7 (DOS-like embedded operating system)
Development Software
ISaGRAF Software ISaGRAF Ver. 3 IEC 61131-3 standard
Languages LD, ST, FBD, SFC, IL & FC
Max. Code Size 64 KB
Scan Time 2 ~ 25 ms for normal program
10 ~ 125 ms (or more) for complex or large program
CPU Module
CPU 80186, 80 MHz
SRAM 768 KB
Flash 512 KB; with Write Protect Switch
microSD Expansion Yes (but ISaGRAF doesn't support)
OS MiniOS7 (DOS-like embedded operating system)
Dual Battery Backup SRAM 512 KB; data valid up to 5 years (for retain variables)
EEPROM 16 KB
NVRAM 31 bytes (battery backup, data valid up to 5 years)
RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year
64-bit Hardware Serial Number Yes, for Software Copy Protection
EEPROM 16 KB
Watchdog Timers Yes (0.8 second)
DIP Switch Yes (8 bits)
Communication Ports
Ethernet RJ-45 x 2, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
COM 0 Internal communication with the high profile I-87K series modules in slots
COM 1 RS-232 (to update firmware) (RxD, TxD and GND); non-isolated
COM 2 RS-485 (Data+, Data-) with internal self-tuner ASIC; 3000 VDC isolated
COM 3 RS-232/RS-485 (RxD, TxD, CTS, RTS and GND for RS-232, Data+ and Data- for RS-485); non-isolated
COM 4 RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); non-isolated
SMMI
LED Display Yes, 5-Digit
Programmable LED Indicators 3
Push Buttons 4
Buzzer yes
I/O Expansion Slots
Slot Number 8
Note: For High Profile I-8K and I-87K Modules Only
Data Bus 8/16 bits
Address Bus Range 2 K for each slot
Mechanical
Dimensions (W x L x H) 231 mm x 132 mm x 111 mm: iP-8417, iP-8447
355 mm x 132 mm x 111 mm: iP-8817, iP-8847
Installation DIN-Rail or Wall Mounting
Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Ambient Relative Humidity 10 ~ 90% RH (non-condensing)
Power
Input Range +10 ~ +30 VDC (non-condensing)
Isolation 1 kV
Redundant Power Inputs Yes, with one power relay (1 A @ 24 VDC) for alarm
Capacity 30 W
Consumption 7.2 W
Protocols (Note that certain protocols require optional devices)
NET ID 8 bits DIP switch to assign NET ID as 1 ~ 255
Modbus RTU/ASCII Master A max. of 2 ports: COM1~5. (To connect to other Modbus Slave devices.)
A max. of Modbus_xxx Function Block amount for 2 ports: 128. (*)
Modbus RTU Slave A max. of 2 ports: COM1 and one of COM2 ~ 3.
(For connecting ISaGRAF, PC/HMI/OPC Server and HMI panels.)
Modbus TCP/IP Slave (For iP-8x47 only) Two Ethernet ports support Modbus TCP/IP Slave Protocol for connecting ISaGRAF & PC/HMI up to 6 connections.
User-defined Protocol Custom protocols can be applied at COM1~20 using Serial communication function blocks. (*)
Remote I/O One of COM2 ~ 4 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards, or RU-87Pn + I-87K High Profile I/O boards as remote I/O. A max. of 64 I-7000/87K remote I/O modules can connect to one PAC.
Fbus Built-in COM3 Port to exchange data between ICP DAS’s ISaGRAF PACs.
Ebus (LAN2: upper port of iP-8x47 ONLY)
Used to exchange data between ICP DAS ISaGRAF Ethernet PACs via the Ethernet port.
Send Email (For iP-8x47 only)
Provide functions to send email to a max. of 10 receivers with a single attached file via the Ethernet port through internet. The max. of file size is about 488 KB.
SMS: Short Message Service One of COM4 ~ 5 can link to a GSM Modem to support SMS. The user can request data/control the controller via a cellular phone. The controller can also send data and alarms to the user’s cellular phone. (*)
Optional GSM Modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem).
Modem Link COM4 can connect a general Modem. Supports PC to remotely download & monitor the controller.
MMICON/LCD One of COM3 or COM4 supports ICP DAS’s MMICON. The MMICON is featured with a 240 x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float.
Redundant Bus7000 Two ISaGRAF PACs can link to remote I-7000 & I-87K High profile I/O modules at the same time. Only one controller is active to control these Remote I/Os. If one is dead, the other one will take over the control of Remote I/Os.
CAN/CANopen COM1 or COM3 ~ 12 can connect to one I-7530 (converter: RS-232 to CAN) to support CAN/CANopen devices and sensors. One iP-8xx7 supports a max. of 3 RS-232 ports to connect a max. of 3 I-7530. (*) (FAQ-086)
FRnet I/O Enable a max. of 4 pcs. I-8172W boards to be used to connect to FRnet I/O modules, such as FR-2053, FR-2057, FR-32R, FR-32P. (Max. 1024-ch. DI + 1024-ch. DO) (FAQ-082, 154)
FTP Client Enable the FTP Client to upload files from the PAC to a remote FTP server on a PC. (FAQ-151)
Optional I/O Functions (Refer to the ISaGRAF PAC I/O Selection Guide for I/O Module list)
PWM Output High Speed PWM Module I-8088W, 8-ch PWM outputs, software support 1 Hz ~ 100 kHz (non-continuous), duty: 0.1 ~ 99.9
DO Module as PWM 8-ch max. for one controller. 500 Hz max.
For Off=1 & On=1 ms Output Square Curve: Off: 1 ~ 32767 ms, On: 1 ~ 32767 ms.
Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W.
(Relay Output boards cannot generate fast square wave)
Counters, Encoder, Frequency Parallel DI Counter 8-ch. max. for 1 controller. Counter Val: 32-bit.; 500 Hz max. Min. ON & OFF width must > 1 ms Optional DI boards: I-8040W, 8040PW, 8042W, 8046W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W.
Serial DI Counter Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit) Optional serial I-87K DI boards: I-87040W, 87046W, 87051W, 87052W, 87053W, 87053W-A5, 87054W, 87055W, 87058W, 87059W, 87063W.
Remote DI Counter All remote I-7000/I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535
High Speed Counter I-87082W: 100 kHz max. 32-bit;
I-8084W: 250 kHz max. 32-bit
Encoder I-8093W: 3-axis Encoder Module, max. 1M Hz for quadrant input mode, max. 4M Hz for pulse/direction and cw/ccw input mode. (FAQ-112)
I-8084W: 250 kHz max. , 4-ch encoder, can be Dir/Pulse, or Up/Down or A/B phase (Quad. mode); Not support Encoder Z-index. (FAQ-100).
Frequency I-87082W: 2-ch, 1 Hz ~ 100 kHz;
I-87088W: 8-ch, 1 Hz ~ 100 kHz;
I-8084W: 8-ch, 1 Hz ~ 250 kHz;
Motion Motion Control Can integrate with one I-8091W (2-axis) or two I-8091W (4-axis) to do motion control. Ethernet communication is also available when doing motion control.
* Note: The COM5 ~ COM20 ports are located in the expansion boards if they are installed in slots 0 ~ 7 of iP-8xx7.
* ISaGRAF FAQ: www.icpdas.com > Support > FAQ > ISaGRAF Soft-Logic PAC
* ICP DAS recommends using NS-205/NS-208 or RS-405/408 (Ring Switch) Industrial Ethernet Switches.

Ordering Information

iP-8417 CR 4 slots, Faster CPU, ISaGRAF based iPAC-8000 (RoHS)
iP-8817 CR 8 slots, Faster CPU, ISaGRAF based iPAC-8000 (RoHS)
iP-8447 CR 4 slots, Faster CPU, Dual Ethernet ISaGRAF based iPAC-8000 (RoHS)
iP-8847 CR 8 slots, Faster CPU, Dual Ethernet ISaGRAF based iPAC-8000 (RoHS)

Related Products