iP-8817
8 Slot ISaGRAF-Based PAC with Expandable I/O. 4 Serial Ports, 8 Hot-Swap Slots for I-87k High Profile Modules. Redundant Power Input, Pre-Loaded Software, & Flexible Protocol Control.
Features
ISaGRAF iPAC-8417 is the ISaGRAF SoftLogic PAC from ICP DAS USA.
Each iP-8817 module is equipped with an 80186, 80 MHz CPU running a MiniOS7 operating system, a variety of I/O ports, dual 10/100 Base-TX Ethernet Ports for iP-8x47, one RS-232/485 port, one RS-485 port, and two RS-232 ports and a range of I/O slots that can be used to integrate high-performance parallel I/O modules or serial I/O modules. Users can also choose RS-485 Remote I/O modules (I-7000 series) or expansion units (RU-87Pn or I-87Kn) plugged with high profile I-87K serial I/O modules.
The iPAC-8000 Series is much faster than the I-8000 Series in which it replaced.
- 80186, 80 MHz CPU
- MiniOS7 Inside
- Embedded ISaGRAF Ver.3 SoftLogic (IEC 61131-3)
- 512 KB Battery Backup SRAM to Retain Data
- 64-bit Hardware Serial Number
- 8 Hot-Swap Slots for I-87K High Profile I/O Modules
- 4 Serial Ports (RS-232/485)
- Redundant Power Inputs
Specifications
Software | |
OS | MiniOS7 |
Protocol | • NET ID • Modbus RTU/ASCII Master • Modbus RTU Slave • DCON Protocol • User-defined Protocol • I/O Type: DCON, Modbus RTU remote I/O • FRnet I/O • SMS • CAN/CANopen |
Development | Embedded ISaGRAF Ver.3 SoftLogic (IEC 61131-3) |
CPU Module | |
CPU | 80186 or compatible, 16-bit and 80 MHz |
64-bit Hardware Serial Number | Yes |
EEPROM | 16 KB |
Flash | 512 KB |
NVRAM | 31 Bytes |
SRAM | 512 KB SRAM, 512 KB Dual battery backup SRAM |
Storage Expansion | Yes, but ISaGRAF does not support |
Real Time Clock | Provide seconds, minutes, hours, dates, day of week, month, year |
Watchdog Timer | Yes |
Display | |
Type | 5 x Digit 7 Segment LED Display |
LED Indicators | |
Status | 3 x Programmabley |
I/O Expansion | |
I/O Type | 5 x Digit 7 Segment LED Display |
Slots | 8 |
COM Ports | |
Ports | 2 x RS-232, 1 x RS-485 (3000 VDC Isolated), 1 x RS-232/RS-485 |
HMI | |
DIP Switch | 8-bit for address |
Push Button | 4 |
Power | |
Input Range | +10 ~ 30 VDC (1 kV Isolated ) |
Consumption | 7.2 W |
Mechanism | |
Dimensions | 355 x 132 x 111 (W x L x H) |
Installation | DIN-Rail, Wall mounting |
Environment | |
Operating Temperature | -25 °C ~ + 75 °C |
Storage Temperature | -30 °C ~ + 80 °C |
Ambient Relative Humidity | 10 ~ 90% RH, non-condensing |