iDS-718iM-D
Intelligent Serial-to-Ethernet with 1 RS-232/422/485. 32-bit and 64-bit Windows XP/2003/Vista/7 Metal Encased Device Server. High-performance 720 Mhz ARM-based processor with UDP Suport. SNMP Management Protocol. Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F)
Features
The iDS-718iM-D has officially been phased out and will no longer be available. It has now been replaced by PDS/PDSM Series, tDS-700 Series, and tGW-700 Series.
The iDS-718i-D model is a new generation Device Server from ICP DAS USA and is equipped with a powerful CPU module running on the open operating system, various connectivity (Ethernet, micro SD and serial port) and communication interfaces. Compared with the previous generation PDS, not only the CPU performance is higher but also more features are improved such as 256 MB flash, 256 MB DDR3 memory, unique 64-bit hardware serial number, and real-time clock, etc. These make the iDS-718i-D becoming one of the most powerful systems.
This device server is designed to add Ethernet and Internet connectivity to any RS-232 and RS-422/485 device, and to eliminate the cable length limitation of legacy serial communication. The iDS, coupled with a large built-in RAM buffer, allow for fast transmission and prevent congestion of serial data on the network. Built-in powerful 720 MHz ARM-based processor offers excellent performance at low power consumption. The preloaded high-performance operating system is open, flexible, scalable and allows user to easily add or remove application/service from configuration mechanism.
- Incorporate Serial Devices in an Ethernet network
- Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7
- High-performance 720 Mhz ARM-based Processor
- 256 MB DDR3 memory for data transmission and buffering
- Zero Data Loss
- UDP Support
- RFC2217 support
- Modem Emulator
- Open, Flexible and Scalable Platform
- SNMP Management Protocol
Specifications
Models | tDS-718iM-D |
System | |
CPU | 32-bit RISC, 720 Mhz |
RAM | 256 MB DDR3 |
Flash | 256 MB |
Peripheral | microSD, RTC, Serial Number, Watchdog, Buzzer |
Communication Interface | |
COM1 | 5-wire RS-232/422/485 (Isolated) |
COM2 | - |
COM3 | - |
COM4 | - |
Ethernet | 10/100 Base-TX, RJ-45 port (Auto-negotiating, Auto MDI/MDI-X, LED indicators), PoE (IEEE 802.3af, Class 1) |
COM Port Signals | |
3-wire RS-232 | RxD, TxD and GND |
5-wire RS-232 | RxD, TxD, CTS, RTS and GND |
RS-422/485 | TxD+, TxD-, RxD+, RxD- and GND/Data+, Data- and GND |
RS-485 | Data+, Data- and Iso.GND |
COM Port Format | |
Data Bits | 5, 6, 7, 8 |
Parity Bits | None, Even, Odd, Mark, Space |
Stop Bits | 1, 1.5, 2 |
Baud Rate | 921.6 kbps Max. |
Flow Control | RTS/CTS, XON/XOFF |
Pull High/Low Resistor | Switch-selectable (1 kΩ for RS-422/485, Non-Resistor for RS-232) |
Power | |
ESD Protection | Yes (with Frame Ground) |
Protection | Power input reverse polarity protection |
Required Supply Voltage | +12 VDC ~ +48 VDC (non-regulated) or PoE (IEEE 802.3af, Class 1) |
Power Consumption | 3.5 W |
Mechanism | |
Dimensions (W x D x H) | 78 mm x 120 mm x 42 mm ( 97 mm x 120 mm x 42 mm for "M" versions ) |
Installation | DIN-Rail |
Casing | Metal (Metal for "M" versions) |
Environment | |
Operating Temperature | -25°C ~ +75°C (-13°F ~ +167°F) |
Storage Temperature | -30°C ~ +80°C (-22°F ~ +176°F) |
Humidity | 10 ~ 90% RH, non-condensing |