I-7550E
PROFIBUS to 10/100 Ethernet Converter. Configurable over a Web Page and allows a PROFIBUS Master Device to access Ethernet devices over TCP/UDP. Has an operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F)
References & Support
Features
- DP-V0 Slave
- Transmission Rate (kbps) 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
- Automatically sets transmission rates
- Max Input/Output of Data is 240Bytes
- Web Configuration
- 10/100 Base-TX
- 2500 Vrms Network Isolation Protection
- 3000 VDC DC Protection Isolation Protection on PROFIBUS side
The I-7550E Converter is specially designed for the slave device of PROFIBUS DP protocol. It allows the PROFIBUS master to access any kinds of Ethernet devices supporting TCP/UDP protocol. The I-7550E can be set as TCP/UDP server and client, it's flexible for user to match their requirement. In addition, the I-7550E module built-in web server, the user can set the module by web browser. By using this module, users can put their Ethernet devices into PROFIBUS network very easily.
Specifications
Hardware |
|
CPU |
80186, 80 MHz or compatible |
SRAM/Flash/EEPROM |
512 KB / 512 KB / 16 KB |
Watchdog |
Watchdog IC CPU built-in |
ESD Protection |
4 kV class A |
PROFIBUS Interface |
|
Controller |
Profichip VPC3+C |
Transceiver |
ADI ADM2486 |
Connector |
9-pin female D-Sub |
Baud Rate (bps) |
9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M |
Transmission Distance (m) |
Depend on baud rate (for example, max. 1200 m at 9.6 kbps ) |
Isolation |
3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
Protocol |
DP-V0 |
UART Interface |
|
COM |
RS-232 (For updating firmware) |
COM Connector |
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND ) |
Baud Rate (bps) |
115200 |
Data bit |
8 |
Stop bit |
1 |
Parity |
None |
Ethernet Interface |
|
Controller | 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
Counter |
RJ-45 with LED indicator |
LED |
|
Round LED |
PWR LED, RUN LED, ERR LED |
Power |
|
Power supply |
Unregulated +10 ~ +30 VDC |
Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
Power Consumption |
2.5 W |
Mechanism |
|
Installation |
DIN-Rail |
Dimensions |
72 mm x 33 mm x 119 mm (W x L x H) |
Environment |
|
Operating Temp. |
-25°C ~ 75°C (-13°F ~ +167°F) |
Storage Temp. |
-30°C ~ +85°C (-22°F ~ +176°F) |
Humidity |
5 ~ 95% RH, non-condensing |