I-7540DM

• 80186-80 Embedded CPU, or compatible
• Ethernet Protocols, TCP,UDP,IP,ICMP,ARP
• 10/100 Base-TX Ethernet Controller
• Reloadable Operating Software
• Message transmitted by using TCP/IP protocol
• COM driver support interrupt & 1K QUEUE Input & Output buffer
• Support one RS-232 port, one RS-485 port and one CAN port
• 2500Vrms photo-isolation protection on CAN side.
• Jumper select 120Ω terminal resistor for CAN channel
• Phillip 82C 250/251CAN Transceiver
• Support both CAN specification 2.0A and 2.0B.
• Max transmission speed up to 1M bps for CAN and 115.2kbps for RS-232 & RS-485
• Max transmission distance of CAN over 1000m (follow CAN specification)
• Built-in self-tuner ASIC controller on RS-485 port
• 7-segment LED display.
• Software configurable CAN and RS-232 communication parameters
• Firmware updated from COM1 or Ethernet port
• Support Web Configuration
• Support maximum 25 Ethernet clients connection
• Support for Virtual COM technology

Introduction

The I-7540D series are CAN to Ethernet converters, and are usually applied as an Ethernet to CAN/RS-232/485 Device Server. They support socket access functions and virtual COM port technology which helps users to get the CAN, RS-232, RS-485 data via virtual COM port. The I-7540D series also provide transparent mode, which enables CAN networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible. By the features of tiny operating system, protocol independence, small casing and flexibility, it is able to widely fit various RS-232, RS-485 and CAN applications, which may be based on private RS-232 protocol, private CAN protocol, Modbus protocol, CANopen protocol, DeviceNet protocol or J1939 protocol.

• Quick Start
• Data Sheet
• User's Manual