I-7188E2-MTCP
Palm-sized Programmable Modbus Gateway with 80188-40 CPU, Modbus Firmware and 384 KB SRAM (Blue Cover)
Features
- Incorporate Serial Devices in an Ethernet network
- Supports Modbus TCP to RTU Gateway
- Built-in High Performance MiniOS7 from ICP DAS
- Easy-to-use Software Development Tool Kits (Using C language)
- Various Communication Interfaces
- 10BASE-T NE2000 Compatible
- RS-232/RS-485
- Programmable LED Indicator
- Build-in Watchdog Timer
Introduction
The I-7188E2-MTCP is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/485 devices to an Ethernet network. The I-7188E2-MTCP also works as a Modbus TCP to RTU gateway that supports most SCADA/HMI communications based on the Modbus TCP protocol.
ICP DAS provides easy-to-use software development tool kits (XServer, Modbus libraries). Users can use them to easily integrate serial devices to have Ethernet/Internet communication ability and through the standard Modbus protocol to communicate with SCADA software (Indusoft, ISaGARF, DasyLab, Trace Mode, Citect, iFix, etc.).
Specifications
CPU Module | |
CPU | 80188, 40 MHz or compatible |
EEPROM | 2 KB |
Flash | 512 KB |
SRAM | 384 KB |
Watchdog Timer | Yes |
LED Indicators | |
Status | 1 x System |
COM Ports | |
Ports | 1 x RS-232, 1 x RS-485 |
Baud Rate | 115200 bps Max. |
Ethernet | |
Ports | 1 x RJ-45, 10 Base-T |
Power | |
Input Range | +10 ~ 30 VDC |
Consumption | 2.0 W |
Mechanical | |
Dimensions (mm) | 72 x 112 x 33 (W x H x D) |
Installation | DIN-Rail Mounting |
Environmental | |
Operating Temperature | -25 ~ +75°C |
Storage Temperature | -40 ~ +80°C |
Humidity | 5 ~ 90% RH, Non-condensing |