I-7051
16 Channel Isolated Digital Input (16-bit Counter) Data Acquisition Module (Source / Sink) communicable over RS-485. Supports operating temperatures between -25°C ~ +75°C (-13°F ~ +167°F).
References & Support
Features
I-7051 is intelligently designed to provide signal conditioning system monitoring and safe value settings. I-7051 is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7051(16-channel Isolated Digital Input) modules. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals.
Specifications
Communication | ||
Interface | 16 | |
Bias Resistor | No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) | |
Format | (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1) | |
Baud Rate | 1200 ~ 115200 bps | |
Protocol | DCON | |
Dual Watchdong | Yes, Module (1.6 Seconds), Communication (Programmable) | |
LED Indicators / Display | ||
System LED Indicator | RS-485 | |
I/O LED Indicator | N, 8, 1 | |
7-Segment LED Display | - | |
Isolation | ||
Intra-Module Isolation, Field-to-Logic | 3750 VDC | |
EMS Protection | ||
ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal | |
±8 kV Air for Random Point | ||
EFT (IEC 61000-4-4) | ±4 kV for Power Line | |
Surge (IEC 61000-4-5) | ±3 kV for Power Line | |
Power | ||
Reverse Polarity | Yes | |
Input Range | 10 ~ 30 VDC | |
Consumption | 0.3 W | |
Mechanical | ||
Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm | |
Installation | DIN-Rail or Wall Mounting | |
Environment | ||
Operating Temperature | -25°C ~ +75°C (-13°F ~ +167°F) | |
Storage Temperature | -40°C ~ +85°C (-40°F ~ 185°F) | |
Humidity | 10 ~ 95% RH, Non-condensing |
I/O Selection
Digital Input/Counter | ||
Interface | 16 | |
Type | Dry Contact | Source |
Wet Contact | Sink/Source | |
Wet Contact | On Voltage Level | +10 ~ 50 VDC |
Off Voltage Level | +4 VDC Max. | |
Dry Contact | On Voltage Level | Close to GND |
Off Voltage | Open | |
Effective Distance for Dry Contact | 500 m Max. | |
Counters | Max. Count | 65535 (16-bit) |
Max. Input Frequency | 100 Hz | |
Min. Pulse Width | 5 ms | |
Input Impedence | 10 KΩ | |
Channel-to-Channel Isolation | - | |
Overvoltage Protection | ±70 VDC |