I-7041P
14-channel Isolated Digital Input Module with 16-bit Counters, communicable over RS-485. Supports operating temperatures between -25°C ~ +75°C (-13°F ~ +167°F).
Features
The I-7041P provides 14 channels for digital input, which features photocouple isolation. Either sink- or source-type digital input can be selected via wire connections, and all channels are able to be used as 16-bit counters. The I-7041P and I-7041PD include 14 LED indicators that can be used for DI channel status monitoring. 4 kV ESD protection and 3750 VDC intra-module isolation are standard. The hardware specifications for the M-7041 and M-7041P are the same as for the I-7041 and I-7041P, and support DCON protocols, which can be confi gured via software. ICPDAS recommends selecting the "P" version of the digital input module for industrial use
Specifications
Digital Input | |
Input Channels | 14 |
Input Type | Sink or Source,Isolated channel with common power or ground |
On Voltage Level | +19 VDC ~ +30 VDC |
Off Voltage Level | +1 VDC Max |
Input Impedance | 3K Ohm, 0.33 W |
Counters | channels : 14 |
Max. Counts: 16-bit (65535) | |
Max. Input Frequency : 100Hz | |
Min. Pulse Width : 5 ms | |
Protocol | DCON |
Isolation Voltage | 3750 Vrms |
Interface | |
Interface | RS-485 |
Format | N, 8, 1 |
Baud Rate | 1200 ~ 115200 bps |
LED Display | |
1 LED as Power/Communication indicator | |
14 LEDs as Digital Input indicators (for I-7041PD) | |
Power | |
Input Voltage Range | +10 VDC ~ +30 VDC |
Power Consumption | 1.0 W (I-7041P)/0.9 W (I-7041PD) |
Environment | |
Operating Temperature | -25 °C to 75 °C |
Storage Temperature | -40 °C to 85 °C |
Humidity | 5% ~ 95% RH, non-condensing |