I-7018Z-G/S
10 Channel Voltage Input, Current Input, & Thermocouple Input Data Acquisition Module with High Accuracy, High ESD Protection, communicable over RS-485, FREE EZ Data Logger Software and short cable. Supports operating temperatures between -25°C ~ +75°C (-13°F ~ +167°F).
Features
I-7018Z is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7018Z modules. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. I-7018Z comes with a daughter board for better CJC compensation. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to directly connect the units, and are also supplied with a 4" cable connector. I-7018Z comes with FREE EZ Data Logger Software.
**Kit includes 4" 25-pin connector cable, along with external module DIN-rail mounting kit**
Mounting OptionsSpecifications
Analog Input | |
Input Channels | 10 Differential |
Input Type | +/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V +/-20mA, 0~20mA, 4~20mA (Requires Optional External 125 Ohm Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710) |
Resolution | 16-bit |
Sampling Rate | 10 Samples/Sec (Total) |
Accuracy | +/- 0.1 % |
-3dB BandWidth | 15.7 Hz |
Zero Drift | +/- 0.5 μV/°C |
Span Drift | +/- 25 ppm/°C |
Common Mode Rejection | 150 dB |
Normal Mode Rejection | 100 dB |
Input Impedance | >500k Ohms |
Over voltage Protection | 240 Vrms |
Open Thermocouple Detection | Yes |
Individual Channel Configuration | Yes |
Temperature outputs consistency | Yes |
Stable temperature output in the field | Yes |
Intra-module Isolation, Field to Logic | 3000VDC |
Interface | |
Interface | RS-485 |
Format | N, 8, 1 |
Baud Rate | 1200 ~ 115200 bps |
DB-1820 (3.81mm pitch) | |
Wire Strip Length | 4 ~ 5 mm |
Wire Range | 16 ~ 24 AWG |
DN-1822 (5.08mm ptich) | |
Wire Strip Length | 4 ~ 5 mm |
Wire Range | 14 ~ 24 AWG |
LED Display | |
1 LED as Power/Communication Indicator | |
Power | |
Input | +10 ~ +30 VDC |
Power Consumption | 1.0W |
Environment | |
Operating Temperature | -25 ~ 75 °C |
Storage Temperature | -40 ~ 85 °C |
Humidity | 5 ~ 95% RH, Non-condensing |
Type | Range (°C) |
J | -210 ~ +760 |
K | -270 ~ +1372 |
T | -270 ~ +400 |
E | -270 ~ +1000 |
R | 0 ~ +1768 |
S | 0 ~ +1768 |
B | 0 ~ +1820 |
N | -270 ~ 1300 |
C | 0 ~ 2320 |
L | -200 ~ +800 |
M | -200 ~ +100 |
L (DIN43710) | -200 ~ +900 |