Fiber optic transmission medium is a good material to protect data transmission from EMI/RFI interference. It has been used in harsh environments extensively. CAN bus is famous in industrial applications. In order to solve the problem between using different transmission mediums, I-2532 is specially designed for converting the electrical CAN bus signal to fiber optic cables.
The fiber length between two I-2532s can be up to 1.4km (4593ft). It is mainly decided by the cable attenuation of fiber and the CAN bus baud. I-2532 is the economical solution for applications which require protecting the data transmission from electrical exposure, surges, lightning or chemical corrosion.
- Compatible with CAN specifications 2.0A and 2.0B
- Fully compatible with the ISO 11898-2 standards
- Supports baud rates up to 500 Kbps
- Jumper for 120Ω terminator resistor of CAN bus
- Fiber Port: ST (Multi-mode)
- Wave Length: 850 nm
- Auto-baud detection
- up to 100 nodes on CAN port
- Removable terminal block
- Mount easily on DIN-rail
- Control System
- Building Automation
- Factory Automation
- Distributed data acquisition
Reference & Support
|CAN Port Channels||2|
8-pin removable screw terminal × 1
ST (Multi-mode) Fiber Port × 2
10K ~ 500Kbps
|Terminator Resistor||Selectable 120Ω terminator resistor by jumper|
|Propagation Delay||125ns max (125ns delay shortens bus line length by ~25m)|
Unregulated +10VDC ~ +30 VDC Power reverse protection,Over-Voltage brown-out protection
|Power Consumption||0.5W max|
Power LED × 1, Transmit LED × 1, Receive LED × 1
-25°C to 75°C
-40°C to 80°C
32.30mm × 99.00mm × 77.50mm (H x W x D)
*For Single Mode Use...
*For Multi Mode Use*...
RS-232,422,485 to Fi...
Multi-mode, SC Conne...
8-Port 10,100 Base-T...
24V , 1.7A 40.8W Pow...
24V , 0.2A 4.8W Powe...