GPS Receiver and 1 DO, 1 PPS Output Module communicable over Modbus RTU over RS-232 and RS-485. Supports operating temperatures from -25°C ~ +75°C


GPS Receiver and 1 DO, 1 PPS Output Module communicable over Modbus RTU over RS-232 and RS-485. Supports operating temperatures from -25°C ~ +75°C

  Price:  $459.00  


GPS-721-MRTU Application ImageThe GPS-721-MRTU, a new GPS solution for Remote GPS Receiver module in ICP DAS, featuring high sensitivity, low power consumption and ultra small form factor with DCON, Modbus RTU and GPS protocols. This powerful item provides you with superior sensitivity and outstanding performance even in the harshest environment.The GPS-721 provides extra 1 channel DO and 1 channel PPS for users PPS signals can be used for precise timekeeping and time measurement. One can combine the PPS functionality with another as time synchronization source.

Therefore, the GPS-721 can be a powerful GPS remote module as well as a general purpose GPS module with RS232 interface. It can also be applied in Automotive navigation, Personal positioning and navigation, Marine navigation, Satellite time correction and etc…

  • Support 66-channel GPS and NMEA v0183 v3.01
  • RS-485 supports DCON protocol and Modbus RTU
  • RS-232 supports NMEA v0183 v3.01 format, DCON or Modbus RTU protocol
  • Built-in 1 channel DO, 1 channel PPS(1 pulse per second), 1 RS-485 port, 1 RS-232 port
  • PPS: 100 ms pulse output/sec for precise timekeeping and time measurement
  • 10 ~ 30 VDC – (Power reverse polarity protection)
  • With various system LED indicators
  • DIN Rail design


Digital Output
Output Channel 1 (Sink)
Output Type Non-isolated Open Collector
Output Current 100 mA
Load Voltage +5 VDC~ +30 VDC
GPS Receiver
Chip MediaTek solution
Frequency L1 1575.42 MHz, C/A code
Support Channel 32
Position Accuracy Capable of SBAS (WAAS, EGNOS, MSAS)
Max. Altitude <18,000 m
Max. Velocity <515 m/s
Acquisition Time Cold Start (Open Sky) = 42 s (typical)
Sensitivity Tracking Up to -158 dBm
Cold start Up to -142 dBm
Protocol Support NMEA 0183 version 3.01
GPS Output
1 PPS Pulse per second output (Default 100 ms pulse/sec)
RS-232 Interface GPS information output
LED Indicators
Power/Communication 1 LED
Protection Power reverse polarity protection
Frame Ground Protection Yes
Required Supply Voltage +10 VDC ~ +30 VDC (non-regulated)
Power Consumption 2.5 W
Dimensions (W x H x D) 72 mm x 117 mm x 35 mm
Weight 200 g
Housing Plastic
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +80 °C
Humidity 5 ~ 95% RH, non-condensing

Related Products

Customer Reviews

- Write a Review - Sort by - Newest - Oldest - Highest Rated - Lowest Rated
Reviewed on 01-07-2016 at 07:58 AM

Charlie - starstarstarstarstar 5 / 5

I use this for tracking my delivery trucks. It was easy to set up with Indusoft SCADA software so I can see the location of the trucks on a map.

Comment on this review