FSM-510G-4F
6-port 10/100/1000Base-T + 4 (100/1G) SFP L2 Plus Managed Switch, with Multicast/Broadcast/Flooding Storm Control and runs under these protocols (VLAN, QoS, Port Trunk, SMTP, TELNET, SNMP, IGMP, IEEE802.1X, LLDP). +12 VDC ~ +48 VDC. Manageable over RS-232 serial. Has operating temperatures of -40°C ~ +75°C (-40°F ~ 167°F). FSM-510G-4F is phased out and replaced by FSM-510G-2F.
References & Support
Features
The FSM-510G-4F has officially been phased out and will no longer be available. It has now been replaced by FSM-510G-4F.
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet
- L2+ features provide better manageability, security, QoS, and performance
- Network redundant Ring fail-over protection (< 20 ms)
- Multicasting support IGMP v1/v2, proxy & snooping
- Multicast/Broadcast/Flooding Storm Control
FSM-510G-4F is a L2 Managed Switch that meets all IEEE 802.3ab/u/x/z Gigabit Ethernet and Ethernet standards. It provides 6 gigabit Ethernet ports (10/100/1000 Mbps TP) 4 SFP ports.
The switch can be managed through RS-232 serial port via direct connection, or through Ethernet port using Telnet or Web-Based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, configure and control each port activity in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features comprehensive and useful function such as DHCP Option 82, QoS (Quality of Service), Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security, SNMP/RMON.
Specifications
| Technology | |||
| Standards | Port Mirroring helps supervisor monitoring network | ||
| IEEE 802.1Q tag-based VLAN for performance | |||
| IEEE 802.1X Access Control improve network security | |||
| IEEE 802.1D Compatible, IEEE802.1w Rapid Spanning Tree & IEEE802.1s Multiple Spanning Tree | |||
| IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper) | |||
| IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3 | |||
| Unknown Unicast/Broadcast/Multicast storm control | |||
| IP-MAC-Port binding for LAN security | |||
| QCL Based on Application traffic for QoS and rate limitation management | |||
| Supports DHCP snooping (DHCP option 82) | |||
| ACL Based on Ethernet Type/ARP/IPv4 for packets permit or deny, rate limitation and port copy | |||
| Supports "power saving" for Green Ethernet requirement | |||
| Supports LLDP (Link Layer Discovery Protocol) provides a standards-based method for enabling switches to advertise themselves. | |||
| Mac Addresses | 8K | ||
| Process Type | Store & forward | ||
| Protocol | VLAN, QoS, Port Trunk, SMTP, TELNET, SNMP, IGMP, IEEE802.1X, LLDP | ||
| Interface | |||
| RJ-45 | 6-port 10/100/1000 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
||
| SFP | 4-port 100/1000 Mbps SFP Fiber Module slots | ||
| LED Indicators | POWER, ALARM , TP Port LED | ||
| Ethernet Isolation | 1500 VRMS 1 minute | ||
| Serial Port | RS-232 (TxD, RxD and GND); Non-isolated | ||
| Frame Ground for EMS Protection |
|
||
| Power | |||
| Input Voltage Range | +12 VDC ~ +48 VDC | ||
| Power Consumption | 10.5 W | ||
| Frame Ground for EMS Protection | Yes | ||
| Mechanical | |||
| Casing | Metal | ||
| Environment Rating | IP30 | ||
| Dimensions (W x L x H) | 57 mm x 121 mm x 164 mm | ||
| Installation | DIN-Rail mounting, Wall mounting | ||
| Environment | |||
| Operating Temperature | -40°C ~ +75°C (-40°F ~ +167°F) | ||
| Storage Temperature | -40°C ~ +85°C (-40°F ~ +185°F) | ||
| Ambient Relative Humidity | 5 ~ 95% RH, non-condensing | ||
References and Support
Customer Reviews (0)
Be the first to leave a review.
Product Added to Cart
ET-7018Z/S
10-channel Thermocou...
$0.00 Each
Quantity added:
