Features
The FR-2156T has 8-channels isolated photo-coupler output and the transfer speed is fixed at 1M bps. The default signal connector of FR-2156T is a 12-pin 0.15” screw terminal connector.
According to different applications, the users can choose suitable modules. The FR-2100 I/O module has a FRNet interface. The users can daisy chain several FR-2100 modules together. Via FRNet, the FR-2100 modules can extend the discrete I/O control of PC and PAC easily. For further information about the networking of FR-2100 series; please refer to literature related to I-7188EF, I-8172, FRB-200
- Built-in Wire-saving FRnet DI/DO control
- High-speed transmission reliability
- Simple synchronization mechanism
- No software overhead on protocol processing
- Supporting broadcasting (1:n data transmission)
- Duplicating output easily
- Fixed I/O scan-time and I/O synchronization
- DIN-Rail mountable
Application
- Industrial Automation
- Remote I/O control
- Wire-saving application
- Built-in Wire-saving FRnet DI/DO control
Specifications
Product Information | ||
Communication speed | 250K bps | |
Communication distance | 400m max | |
Number of channels | 32 | |
Input low voltage | 0 ~ +/-1V | |
Input high voltage | 3.5 VDC ~ 30 VDC | |
Input impedance | 3K; 1/4W | |
Response time | 1 KHz max | |
Power Requirement | 10~30V | |
Wire cable | CPEV 0.9S (2P Twisted-pair wire) | |
Power consumption | 24V@140mA(max) | |
Operating temperature | -25°C ~ +75°C | |
Operating humidity | 10% ~ 90% RH, non-condensing | |
Storage temperature | -30°C ~ +85°C | |
Storage humidity | 5% ~ 95% RH, non-condensing | |
Dimensions | 173 mm x 117 mm |
- Built-in FRnet interface
- Real I/O synchronization
- Innovative token-stream technology
- Support Broadcasting
- Real Deterministic Control
- Fixed Scan time: 256 points @ 2.88 ms
- Each bank consists of 8 input channels and has its own ground reference
- ASIC design without CPU
- Memory-map I/O
- No protocol and no software overhead
- Easy Programming and OS-independent
- Din-rail mounting
- Two-Wire Cabling
- Jumper setting
- Interface circuit