32-bit High Speed Counter /  Frequency module for use with iDCS-8000 redundancy I/O racks. Counts up to 500 KHz input signal with Accuracy of +/-0.4% FSR. When in redundant mode, if a failure occurs, the slave module takes over.

F-8084

32-bit High Speed Counter / Frequency module for use with iDCS-8000 redundancy I/O racks. Counts up to 500 KHz input signal with Accuracy of +/-0.4% FSR. When in redundant mode, if a failure occurs, the slave module takes over.

  Price:  $999.00  

Features

F-8084_la01.jpg"The F-8084 is a 32-bit high speed up-counter/frequency module. It can count up to 500 KHz input signal, and accuracy of the frequency mode is +/-0.4% FSR. The F-8084 features many diagnostic like some failures of communication, EEPROM, WDT, decoder, etc. When the modules are in the redundant mode and a failure occurs the slave module will take over as soon as possible. Moreover, the redundant switching is not only fast but also reliable for data exchanging. Thus, users can easily to use F-8084 to count.

  • 32-bit counter
  • 8 up-counter/frequency channels
  • 1 ~ 32767 us digital filter
  • Falling/Rising/Both edge trigger
  • RoHS compliance
  • 3000 VDC isolation from input to frame ground
  • 3000 VDC isolation from output to backplane
  • 3000 VDC isolation from output to frame ground
  • Redundancy
  • No error counting when redundant switching

Specifications

Feature
Redundant
Yes (The counting error less than 1 counter when input signal < 10 KHz)
Termination board break off detection
Yes
Digital filter
Yes (1~32767us)
LED indicator
1 RUN, 1 ACT, 1 DUX
Pulse Input
Number of channels
8
Type
Counter/Frequency
Min. Pulse Width
2 us
Input Frequency Range
1 Hz ~ 500 KHz
Rated Voltage
30 VDC
Input voltage range, "1"
4.5 VDC~ 30 VDC
Input voltage range, "0"
< 1 VDC
Detection time
2 us
Input impedance
200/500/1KΩ or none (5 KΩ)
Nominal input channel current
20mA @ 24VDC
Maximum input current
25mA @ 30VDC
Isolation
3000 VDC
Certification
EMC
EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board
DN-PI-M
Maximum power consumption
1.9 W
Operating temperature
-25°C ~ +75°C
Humidity
5 ~ 95 % RH, Non-condensing
Weight
300 g
Dimensions (W x L x H)
30 mm x 85 mm x 115 mm

Related Products