Download Now

Enter your information or login to view the document.


×
Ethernet I/O Module with 3-ch Encoder/Counter Inputs. Support for both Modbus TCP and Modbus UDP Protocols. Wide Operating Temperature Range: -25 ~ +75°C

ET-7083B

Ethernet I/O Module with 3-ch Encoder/Counter Inputs. Support for both Modbus TCP and Modbus UDP Protocols. Wide Operating Temperature Range: -25 ~ +75°C

    Item Not Available  


Features

This product is phased out and replaced by ET-7083


The ET-7083/PET-7083 is a 3-axis high speed encoder/counter module. Its each axis can be individually configured for Quadrant, Pulse/Direction or CW/CCW counting modes. The maximum input rate for Quadrant counting mode is 1 MHz, and for Pulse/Direction, CW/CCW counting modes is 4 MHz.

The encoder/counter module is equipped a FRAM to retain the counter value after it is powered off. FRAM is a nonvolatile memory that can hold written data even after it is powered off. The data retention can be 10 years. And the feature can be configured as enabled or disabled.

  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • 2-port Ethernet Switch for Daisy-Chain Topology
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • Built-in I/O
    • 3-Axis 32-bit encoder/counter inputs
    • 1 MHz max. for Quadrant mode
    • 4 MHz max. for CW/CCW, Pulse/Direction mode
    • Count Value Retention for 10 years

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.

Specifications

Software
Built-In Web Server
Yes
Web HMI
Yes
I/O Pair Connection
Yes
Communication
Ethernet Port
1 x RJ-45, 10/100 Base-TX
PoE -
Protocol Modbus/TCP, Modbus/UDP
Security ID, Password and IP Filter
Dual Watch Dog
Yes, Module (0.8 second), Communication (Programmable)
LED Indicators
for System Running
Yes
For Ethernet Link/Act
Yes
for DI/DO
-
for PoE Power
-
2-Way Isolation
Ethernet
1500 VDC
I/O
2500 VDC
EMS Protection
ESD (IEC 61000-4-2)
4 kV Contact for Each Terminal and 8 kV Air for Random Point
EFT (IEC 61000-4-4)
+/-4 kV for Power
Power Requirements
Reverse Polarity Protection Yes
Powered from Terminal Block 1 ~ 30 VDC
Power PoE -
Consumption
2.7W
Mechancial
Dimensions
72 mm x 123 mm x 35 mm
Installation
DIN-Rail or Wall mounting
Environmental
Operating Temperature
-25 ~ +75°C
Storage Temperature
-30 ~ +80°C
Humidity
10 ~ 90% RH, Non-condensing
Environmental
Operating Temperature
-25 ℃ ~ +55 ℃
Storage Temperature
-40 ℃ ~ +80 ℃
Ambient Relative Humidity
5 ~ 95% RH, non-condensing

I/O Specification

Software
Axis
3
Counting Mode
Quadrant
CW/CCW
Pulse/Direction
Maximum Count 32-bit
Maximum Counting Rate Quadrant mode: 1 Mhz
CW/CCW mode: 4Mhz
Pulse/Direction mode: 4Mhz
Count Value Retention Yes, for 10 years
Counter Preset Value Programmable
Input Signal Level 5 VDC
12 VDC with 1k ohm external resistor (1/2 W)
24 VDC with 2k ohm external resistor (1/2 W)
Intra-module Isolation, Field to Logic 2500 Vrms

References and Support

Customer Reviews (0)

Be the first to leave a review.

Recently Viewed Items

×

Write a Review

Name


E-mail


Phone


Rating: out of 5 Stars
Review (max 1000 characters)

characters left