EtherCAT to Modbus RTU Gateway (RoHS)


EtherCAT to Modbus RTU Gateway (RoHS)

  Price:  $739.00  


ICP DAS USA’s ECAT-2610 Communicator is a protocol converter gateway that connects non-networked industrial devices and equipment to EtherCAT. The ECAT-2610 gateway performs an intelligent protocol conversion and presents the serial data to the Master PLC/Controller as easily processed I/O data.

Easily integrate your serial RS-232/422/485 based industrial devices and equipment to an EtherCAT control system without the need for any changes to the device. Just connect, configure and it's finished.

  • Powerful MCU handles efficient network traffic
  • 2 x RJ-45 bus interface
  • Integrate RS-232/422/485 serial device to EtherCAT
  • Allows system integrators to retro-fit older automation devices into modern EtherCAT communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with EtherCAT support
  • Performs complete serial protocol conversion, no PLC function blocks required
  • Supports maximum 128 Input and Output Bytes Data
  • Supports maximum Baud Rate 115200 bps


Communication Interface

RJ-45 Port

RJ-45 x 1 Distance between Stations: Max. 100 m (100BASE-TX) Data Transfer Medium: Ethernet/EtherCAT Cable (Min. CAT 5e)

Serial Interface




The RS-232, RS-422 and RS-485 cannot be used simultaneously

  • TxD, RxD, GND
  • TxD+, TxD-, RxD+, RxD-
  • Data+, Data-

Power Input

Redundant Input Range

+12 ~ +48 VDC

Power Consumption

0.1 A @ 24 VDC


Power reverse polarity protection


3-Pin Removable Terminal Block (5.08mm)



110mm x 90mm x 33mm (H x W x D)




Operating Temperature

-25°C ~ + 75°C

Storage Temperature

-30°C ~ + 80°C

Ambient Relative Humidity

10 ~ 90% RH, non-condensing

Customers who bought this item also purchased the following items.

Related Products