48 V / 2.5 A, 120 W Single Output Industrial DIN Rail Power Supply, voltage range 88 ~ 132 VAC/176 ~ 264 VAC by switch 248 ~ 370 VDC

DR-120-48

48 V / 2.5 A, 120 W Single Output Industrial DIN Rail Power Supply, voltage range 88 ~ 132 VAC/176 ~ 264 VAC by switch 248 ~ 370 VDC

  Price:  $179.00  

Fastest Delivery: (Details) X Delivery Details
We ship via UPS and fastest delivery is with Next Day Air. UPS Next Day Air Early typically gets their product to them as early as 8am, Next Day Air gets their product typically there by 10:30am and Next Day Air Saver typically by 3pm. We ship same day for in stock items and the lead time is up to one week for out of stock items. Delivery is dependent on UPS and your shipping method.

Features

  • Universal AC input/Full range
  • Protections: Short circuit / Overload / Over voltage
  • Cooling by free air convection
  • Can be installed on DIN rail TS-35/7.5 or 15
  • UL 508(industrial control equipment)approved
  • LED indicator for power on
  • Fixed switching frequency at 55KHz
  • 100% full load burn-in test

Reference & Support

Specifications

Model DR-120-48
Input
Voltage range 88 ~ 132 VAC/176 ~ 264 VAC by switch
248 ~ 370 VDC
Frequency range 47 ~ 63Hz
Efficiency (Typ.) 84 %
AC Current (Typ.) 2.6 A/115 VAC
1.6 A/230 VAC
Inrush Current (Typ.) Cold Start 20 A/115 VAC
40 A/230 VAC
Leakage current <3.5 mA / 240 VAC
Output
DC Voltage 48 V
Rated Current 2.5 A
Current Range 0 ~ 2.5 A
Rated power 120 W
Ripple & noise (max.)  Note.2 100mVp-p
Voltage ADJ. range 48 ~ 53 V
Voltage Tolerance        Note.3 ±1.0%
Line Regulation ±0.5%
Load regulation ±1.0%
Setup, rise Time           Note.5 500 ms, 70 ms/230 VAC
500 ms, 70 ms/115 VAC at full load
Hold up time (Typ.) 36 ms/230 VAC
32 ms/115 VAC at full load
Protection
Overload 105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Over voltage 58 ~ 65 V
Protection type : Shut down o/p voltage, re-power on to recover
Environmental
Working temp. -10 ~ +60 °C (Refer to output load derating curve)
Working humidity 20 ~ 90% RH non-condensing
Storage TEMP., humidity -20 ~ +85 °C , 10 ~ 95% RH
TEMP. Coefficient ±0.03%/°C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety & EMC (Note 4)
Safety standards UL508, UL60950-1, TUV EN60950-1 Approved
Withstand voltage I/P-O/P:3KVAC      I/P-FG:1.5KVAC      O/P-FG:0.5KVAC
Isolation resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500 VDC
EMI Conduction & Radiation Compliance to EN55011,EN55022 (CISPR22) Class B
Hsrmonic current Compliance to EN61000-3-2,-3
EMS immunity Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A
DC OK Relay Contact
Contact Close When the output voltage reaches the adjusted output voltage.
Contact Open When the output voltage drop below 90% output voltage.
Contact Ratings (max.) 30V/1A resistive load
Others
MTBF 136.8Khrs min.
MIL-HDBK-217F (25°C)
Dimensions (W x H x D) 65.5 x 125.2 x 100 mm
Packing 0.79 Kg; 20 pcs/16.5 Kg/1.1 CUFT
NOTE
  1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 

Terminal Pin. No Assignment (TB1) Terminal Pin. No Assignment (TB2)
Pin No. Assignment
1 FGterminal
2 AC/N
3 AC/L
Pin No. Assignment
1,2 DC OUTPUT +V
3,4 DC OUTPUT -V

 

Output Derating

Static Characteristics (24V)

accessories accessories 2

Related Products