DN-843I-CT-50
3-channel current input sensor with channel to channel isolation. Can be used to monitor current from inverters in solar panel and wind turbine applications and turn the current into voltage which can be measured with an analog input type data acquisition module for analysis
Features
DN-843I-CT-50 is a current input sensor, it has the maximum input range ±50 A and converts to ±4 V. It can be used with the analog input modules such as I-7017R and I-87017R etc. to monitor or measure the high current.
- AC/DC Source Input
- Linear Attenuation Ratio
- Isolation Input
- 4 kV ESD Protection
- RoHS Compliance
- A Wide Range of Operating Temperature: -25 °C ~ +75 °C
- Easily wire connection
Applications
- Current Monitor
- Transducer
Specifications
General | |
Channel | 3 |
Input Type | AC/DC Current |
Input Range | +/- 50 A |
Output Type | AC/DC Voltage |
Output Range | +/- 4 Vpp |
CT Type | Solid Core (closed) |
Accuracy | 1% of FSR |
Chanel to Channel Isolation | Yes, 3000 Vrms |
Intra-module Isolation, Input to Output | 3000 VDC |
Bandwidth | 50 KHz |
Input Impedance | > 1 MΩ |
EMS Protection | |
ESD (IEC 61000-4-2) | +/- 4 kV contact for power line, input and output channels, +/- 8 kV air for random point |
Power Input | |
Input Range | +10 ~ +24 VDC |
Power Consumption | 1.2 W |
Mechanical | |
Dimensions (W x L x H) | 148 mm x 83 mm x 39 mm |
Installation | DIN-Rail Mounting |
Environment | |
Operating Temperature | -25 ~ +75 °C |
Storage Temperature | -30 ~ +75 °C |
Humidity | 10 ~ 90% RH, Non-condensing |