DN-843I-CT-1
3-channel current input sensor with channel to channel isolation. Can be used to monitor current from inverters in solar panel and wind turbine applications and turn the current into voltage which can be measured with an analog input type data acquisition module for analysis.
Features
DN-843I-CT-1 is a current input sensor, it has the maximum input range ±1 A and converts to ±1.6 V. It can be used with the analog input modules such as I-7017R and I-87017R etc. to monitor or measure the high current.
- AC/DC Source Input
- Linear Attenuation Ratio
- Isolation Input
- 4 kV ESD Protection
- RoHS Compliance
- A Wide Range of Operating Temperature: -25 °C ~ +75 °C (-13°F ~ +167°F)
- Easily wire connection
Applications
- Current Monitor
- Transducer
Specifications
General | |
Channels | 3 |
Input Type | AC/DC Current |
Output Type | AC/DC Voltage |
Input Current Range | ±1 Amp |
Output Voltage Range | ±1.6 V @ ±1 Amp |
Max. Input Frequency | 50 kHz |
Accuracy of Max. Voltage output | 1% Typical |
ESD Protection | 4 kV, contact for each terminal |
Power | |
Power Consumption | 1 W |
Environment | |
Operating Temperature | -25 °C ~ 75 °C |
Storage Temperature | -30 °C ~ 75 °C |
Humidity | 5% ~ 95% RH, Non-condensing |
Dimensions | |
148 mm x 76 mm x 39 mm (W x D x H) |