DIO-144
144-Bit OPTO-22 DIO ISA Board with 144 TTL Digital I/O Lines and Software Development Kit. Can be used to Control Relays and LED's. Has 2 input lines for interrupts. Supports operating temperatures from 0 ~ 60 °C.
Features
The DIO-144 has officially been phased out and will no longer be available. It has now been replaced by PIO-D144U and PEX-D144LS.
The DIO-144/96 provides 144/96 TTL digital I/O lines. The DIO-144/96 emulates 8255 mode 0 and has an increased output current of 15 mA (source) and 64 mA (sink) , allowing it to control LED, relay, etc. The DIO-144/96 consists of eighteen 8 bit bi-directional ports and 2 input lines for interrupt enable and interrupt. The 8 bit ports are named port A(PA),port B(PB) and port C(PC). The port C can be split into two four bit. All port are configured as inputs upon power-up or reset. The DIO-144/96 uses 4 consecutive I/O locations in I/O addressing space. The base address is selectable from 200 to 3FF hex. The interrupt signal can be connected to any of the interrupt levels 2 through 15.
Features
- Double side SMT , short card, power saving
- DIO-144 : 144 digital I/O lines
DIO-96 : 96 digital I/O lines - Emulate 8255 mode 0 (Basic Input / Output mode)
- Buffer output for higher driving capability than 8255
- Register compatible to 722 series
- Programmable interrupt handling
- DIO-144 : Six 50-pin Header
DIO-96 : Four 50-pin Header - Output status readback
Applications
- Factory automation
- Product test
- Test automation
- Digital I/O control
- Alarm monitoring
- 4-channel SSR Output Daughter Board
Software
- DOS sample program(with source codes)
- DLL and OCX SDK for Windows 98/NT/2000
- DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7
- VB/VC/Delphi/BCB sample programs with source codes are included
- LabVIEW toolkit for Windows
- Driver for Linux and DasyLab
Specifications
Digital Input | |
Channels | 144 (OPTO-22 compatible) |
Compatibility | 5 V/TTL |
Input Voltage | Logic 0: 0.8 V max. Logic 1: 2.0 V min. |
Response Speed | 1.0 MHz (Typical) |
Digital Output | |
Channels | 144 (OPTO-22 compatible) |
Compatibility | 5 V/TTL |
Output Voltage | Logic 0: 0.4 V max. Logic 1: 2.4 V min. |
Output Capability | Sink: 0.8 mA @ 0.8 V Source: -2.4 mA @ 2.0 V |
Response Speed | 1.0 MHz (Typical) |
General | |
Bus Type | ISA |
I/O Connector | 50-pin box header x 6 |
Dimensions (L x W x D) | 182 mm x 120 mm x 22 mm |
Power Consumption | 700 mA @ +5 V |
Operating Temperature | 0 ~ 60 °C |
Storage Temperature | -20 ~ 70 °C |
Humidity | 5 ~ 85% RH, non-condensing |