CANopen Slave Module of 8-channel RTD Inputs for 2-wire or 3-wire (5-pin screw terminal block).  16-bit resolution. 1.5 W DIN-Rail Mountable. Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F)

CAN-2015C

CANopen Slave Module of 8-channel RTD Inputs for 2-wire or 3-wire (5-pin screw terminal block). 16-bit resolution. 1.5 W DIN-Rail Mountable. Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F)

  Price:  $599.00  

Features

The CAN-2015C is a 8 RTD input channel CANopen based network protocol used for acquiring RTD data. This slave device follows the CiA 301 version 4.02 and CiA 401 version 2.1. It can configured via standard CANopen protocol. The CAN-2015C also passes the CiA CANopen Conformance Test tool, thus making it compatible with other CANopen devices. Applying the EDS can allow the CAN-2015C to be integrated with standard CANopen master.

A CANbus based protocol used ideally for embedded network systems, which include environmental monitoring, remote data acquisition, factory automation, industrial machine control, vehicle control system, medical equipment, and packaging machine control.

  • Provide default EDS file
  • Passed the validation of CiA CANopen Conformance Test Tools
  • ESD Protection 4 KV Contact for each channel
  • Support Power Supply +10 ~ +30 VDC
  • Support CiA-301 v4.02, CiA-401 v2.1
  • Support Dynamic PDO

Specifications

CANopen Interface
Connector
5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
Baud Rate (bps)
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M, selected by rotary switch
Terminator Resistor
DIP switch for the 120 Ω terminator resistor
Protocol
CANopen CiA 301 ver4.02, CiA 401 ver2.1
Node ID
1~99 selected by rotary switch
NMT Slave
Error Control Node Guarding protocol / Heartbeat Producer
SDOs 1 server, 0 client
PDOs 10 RxPDO, 10 TxPDO (Supports dynamic PDO)
PDO Modes Event-triggered, remotely-requested, synchronous (cyclic), synchronous (acyclic)
Emergency Message Yes
EDS file Yes
Analog Input
Channels 8 channels for 2-wire or 3-wire RTD
Input Type Pt100, Pt1000, Ni120, Cu100, Cu1000, JPt100
Resolution 16-bit
Sampling Rate 10 Samples/Sec (Total)
Accuracy +/-0.05% FSR
Zero Drift +/- 0.5 μV/ °C
Span Drift +/- 20 ppm/ °C
Common Mode Rejction 150 dB
Normal Mode Rejection 100 dB
Individual Channel Configuration Yes
Open Thermocouple Detection Yes
Over Voltage Protection 120 VDC / 110 VAC
Input Impedence 20 MΩ
Isolation 3000 V DC-DC isolation, 3000 Vrms photo-coupler isolation
Hardware
ESD Protection
Contact 4 kV class A
LED
LEDs
PWR LED, RUN LED, ERR LED, 8 LEDs for the AI high alarms or low alarms
Power
Power Supply
Unregulated +10 ~ +30 VDC
Power Consumption
1.5 W
Mechanism
Casing Plastic case, fire-retardant materials (UL94-V0 Level)
Installation DIN-Rail
Dimensions
33 mm x 99 mm x 78 mm ( W x L x H )
Environmental
Operating Temperature
-25°C ~ +75°C (-13°F ~ +167°F)
Storage Temperature
-30°C ~ +80°C (-22°F ~ +176°F)
Ambient Relative Humidity
10 ~ 90% RH, non-condensing

Related Products


ICP DAS USA,Inc.