ACE-540A

write a review write a review

24V / 2A 48W Power supply with Panel Mount.

~This product is phased out and replaced by DP-640~

~This product is phased out and replaced by DP-640~

24 Volt / 2 Amp Panel Mount Power Supply

Input Range : 85V-26AC
Input Frequency : 47Hz to 63 Hz
Input Current : less than 1A at 115VAC or 0.6A at 230V
Inrush Current : not exceed 30A at 115VAC or 60A at 230V
Output : 24VDC/2A max.
Ripple /Noise : Pk to Peak less than 240mV
Line Regulation : less than +/-1% by changing the output load +/-40% from 60% rated load
Load Regulation : less than +/-1% by changing the output load +/-40% from 60% rated load
Efficiency : higher than 7
Hold-up Time : 20ms (typ.) at 115V
Protection: Over Voltage Protection .
Trip point: 26.2V to 31V
Operating Temperature : -20°C to 70°C
Storage Temperature : -40°C to 85°C
Altitude : 0 - 10,000
MTBF : 396,220 Hrs
Power ON/OFF switch included
Safe UL 1950, CSA 22.2 No. VDE EN 60 950
EMI : FCC docket 20780 curvB,EN55022
EMS : EN-50082
IEC 801-2,8KV (air discharge) criteria B
IEC 801-3,3V/M criteria B
IEC 801-4,2KV (air discharge) criteria B
IEC 801-5,2KV (air discharge) criteria B
Dimensions : 198mm x 97mm x 40.5mm
Din Rail Mount

Write a Review