ZT-2060
Zigbee Wireless 6-channel Isolated Digital Input (Counter) and 4-channel Relay Output (Digital Output) Zigbee Data Acquisition Module. Supports DCON and Modbus RTU Protocols and operating temperatures from -25 ~ +75°C (-13F ~ 167F), communication distance up to 700 meters (2297 feet).
References & Support
Features
The ZT-2060 offers 4 Form A power relay output channels and 6 digital input channels, each of which features photocouple isolation. In addition, you can choose sink-type or source-type input via wire connections. All channels are able to be used as 16-bit counters. The ZT-2060 has 10 LED indicators to display the channel status, and has 4 kV ESD protection and 3000 VDC intramodule isolation. Users can easily configure the module address, protocol, checksum, ZB-PID and ZB-channel settings using a combination of rotary and DIP switches.
- ISM 2.4 GHz Operating Frequency
- Fully Compliant with 2.4G IEEE 802.15.4/ZigBee Specifications
- Wireless Transmission Range up to 700 m
- GUI Configuration Software (Windows Version)
- 6 Digital Input Channels and 4 Relay Output Channels
- Supports 16-bit Counters for Digital Input Channels
- Surge and ESD Protection
- DIN-Rail Mountable
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
Specifications
Digital Input | ||
Input Channels | 6 | |
Input Types | Isolated, Wet Contact (Sink/Source) | |
Input Level | On Voltage Level | +3.5 VDC ~ +30 VDC |
Off Voltage Level | +1 VDC Max. | |
Input Impedance | 3 kΩ, 0.33 W | |
Counter | Channels | 6 |
Max. Count | 16-bit (65535) | |
Max. Input Frequency | 100 Hz | |
Min. Pulse Width | 5 ms | |
Relay Output | ||
Output Channels | 4 | |
Output Types | Power Relay, Form A | |
Contact Rating | 5 A @ (250 VAC/30 VDC) | |
Max. Contact Voltage | 270 VAC/125 VDC | |
Operate Time | 10 ms max. at Rated Voltage | |
Release Time | 5 ms max. at Rated Voltage | |
Endurance | Electrical | Resistive Load: 100,000 ops. min. (10 ops/minute) |
Mechanical | At No Load: 20,000,000 ops. min. (300 ops/minute) | |
Dielectric Strength | Between Contacts | 750 VAC for 1 minute |
Between Coil to Contacts | 3,000 VAC for 1 minute | |
Insulation Resistance | 5,080 V (1.2/50 μs) | |
Surge Strength | 5 ms max. at Rated Voltage | |
ESD Protection | +/-4 kV contact for each channel |
Communication Interface | ||
Wireless Standards | ZigBee 2007 Pro | |
Transmission Power | 11 dBm (FCC Certificated) | |
2.4 GHz Antenna | 5 dBi Omni directional | |
Transmission Range (LoS) | 700 m (Typical) | |
Certification | CE/FCC, FCC ID | |
Max. Slaves in a ZigBee Network | 255 | |
Protocols | Supports DCON and Modbus RTU Protocols | |
Hot Swap | Rotary and DIP switch | |
LED Indicators | ||
Power | 1 LED, Red | |
ZigBee Communication | 1 LED, Green | |
Digital Input and Output | 6 Green LEDs for Digital Input 4 Red LEDs for Relay Output |
|
Isolation | ||
Intra-module Isolated, Field-to-Logic |
2500 VDC | |
EMS Protection | ||
ESD (IEC 61000-4-2) | 4 kV Contact for Power Line, Communication Line and each Channel, 8 kV Air for Random Point |
|
EFT (IEC 61000-4-4) | 4 kV for Power Line | |
Power | ||
Input Voltage Range | +10 VDC ~ +30 VDC | |
Power Consumption | 1.4 W Max. | |
Mechanical | ||
Flammability | Fire Retardant Materials (UL94-V0 Level) | |
Dimensions (W x L x H) | 33 mm x 94 mm x 110 mm | |
Installation | DIN-Rail | |
Environment | ||
Operating Temperature | -25 ~ +75°C | |
Storage Temperature | -30 ~ +80°C | |
Relative Humidity | 10 ~ 90% RH, Non-condensing |