|
WISE-7152
|
|
> Data Acquisition > Remote I/O Modules > WISE 71xx Modules > WISE-7152
|
 |
| Product Reference & Support |
|
| 8-channel Isolated Source Type Open Collector Output and 8-channel Isolated Digital Input PoE Module. Can implement IF-Then Else type control logic. Communicable over Modbus TCP Protocol. |
WISE-7152: $339.00 
|
| Please Call 1-888-971-9888 for Volume discount pricing! | |
|
|
 WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.
WISE-7152 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7152 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
This module WISE-7152 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 8-channel isolated open collector outputs and 8-channel isolated wet contact digital inputs. Each output channel supports 650mA current driving +10 ~ 40 VDC and each digital input channel supports counter input.
- Built-in Web Server for IF-THEN-ELSE rule setting
- Built-in IF-THEN-ELSE rule enigne for logic operation
- No more programming. Just click and get done!
- Support IO, Counter, Timer, Email operations
- Modbus/TCP Protocol for SCADA Software Seamless Integration
- IEEE 802.3af-compliant Power over Ethernet (PoE)
- 10/100 Base-TX Ethernet
- 2-way Isolation/ESD Protection
- DO Type: 8 Isolation Open Collector (Sink Type)
- DI Type: 8 Isolation Wet Contact (Sink/Source)
Applications
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc. |
| Specifications & Additional Information |
|
| Digital Input |
| Input Channels |
8 |
| Input Type |
Wet Contact (Sink, Source) |
| On Voltage Level |
+10 VDC ~ +50 VDC |
| Off Voltage Level |
+4 VDC Max |
| Input Impedance |
10 kΩ |
| Counters |
Max. Count |
65535 (16 bits) |
| Max. Input Frequency |
50 Hz |
| Min. Pulse Width |
10 ms |
| Overvoltage Protection |
+70 VDC |
| Digital Output |
| Output Channels |
8 |
| Output Type |
Open Collector (Source) |
| Max Load Current |
650 mA/channel at 25 °C |
| Output Voltage |
+10 VDC ~ +40 VDC |
| Overvoltage Protection |
47 VDC |
| Overload Protection |
- |
| Short Circuit Protection |
Yes |
| System |
| CPU |
16-bit CPU |
| SRAM |
512 KB |
| Flash Memory |
512 KB |
| EEPROM |
16 KB |
| Watchdog |
Yes |
| Communication |
| PoE Ethernet Port |
10 / 100 Base-TX (With Link, Activity LED Indicator) and Automatic MDI/MDI-X |
| 2 Way Isolation |
| I/O |
3750 Vrms |
| EMS Protection |
| ESD (IEC 61000-4-2) |
4 kV Contact for each terminal |
| EFT (IEC 61000-4-4) |
+/-2 kV for Power |
| LED Indicators |
| PoE |
PoE On |
| L1 |
System Running |
| L2 |
Ethernet Link/Act |
| L3 |
Ethernet 10/100M Speed |
| Power Requirements |
| Reserve Polarity Protection |
Yes |
| Powered from terminal block |
Yes, 12 ~ 48 VDC |
| Powered from PoE |
Yes, IEEE 802.3af, Class1 |
| Consumption |
4.3 W |
| Mechanical |
| Dimensions (W x H x D) |
72 mm x 123 mm x 35 mm |
| Installation |
DIN-Rail or Wall mounting |
| Environment |
| Operating Temperature |
-25 ~ +75 °C |
| Storage Temperature |
-30 ~ +80 °C |
| Humidity |
10 ~ 90% RH, non-condensing |
Software Specifications
| Functions |
| Rule Configuration Website |
Access Web server on WISE controllers to edit and upload logic rules through web browser. |
| 36 IF-THEN-ELSE Logic Rules |
3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions |
| 48 Internal Registers |
Hold temporary variables and read/write data via Modbus/TCP address. |
| 12 Timers |
Delay / Timing functions. |
| 12 Emails |
Send Email messages to pre-set Email receivers. |
| 12 CGI Commands |
Send pre-set CGI commands. |
| 12 Recipes |
Set up THEN/ELSE action groups. |
| 8 P2P remote modules |
Set up the connection information for the remote WISE modules. |
| Modbus/TCP Protocol |
Real time control and monitoring I/O channels and system status of controllers via SCADA software. |
| IF Conditions |
| DI Channel |
ON,OFF,ON to OFF,OFF to ON,Change |
| Internal Register |
=,>,<,>=,<=(value) |
| DI Counter |
=,>,<,>=,<=(value),Change |
| DO Counter |
| Timer |
Timeout,Not Timeout |
| P2P |
DI,AI,DI counter,DO counter,IR |
| Rule Status |
Enable,Disable |
| THEN / ELSE Actions |
| DO Channel |
ON,OFF,Pulse Output |
| Internal Register |
Change the value |
| DI Counter |
Reset |
| DO Counter |
| Timer |
Start,Stop |
| Email |
Send |
| CGI Commands |
| Recipe |
Execute |
| P2P |
DO(On/Off),AO,IR |
| Rule Status |
Enable,Disable |
|
|
|
WISE-4000
3-channel Digital Input, 3-channel Digital Output, and 8-channel Analog Input GPRS Module. For automation without programming, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP
More Info |
WISE-5800
User-defined I/O & Data Logger Module Communicable over Modbus TCP. Supports 1 XW I/O expansion board inside and up to 16 RS-485 based I-7000 modules or Modbus RTU devices.
More Info |
WISE-7115
7-channel RTD Input with 3-wire RTD lead resistance elimination PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP
More Info |
WISE-7160
6-channel Power Relay Output and 6-channel Isolation Digital Input PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP
More Info |
WISE-7126
6-channel Analog Inputs, 2-channel Analog Outputs, 2-channel Digital Inputs And 2-channel Digital Outputs PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP
More Info |
WISE-7901
User-defined I/O Expansion PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP
More Info |
WISE-7167
8-Channel Power Relay Output PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP
More Info |
WISE-4000D
3-channel Digital Input, 3-channel Digital Output, and 8-channel Analog Input GPRS Module with display, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP
More Info |
|
|
View Cart 
Fr 
Sp
ISO 9001 and ISO 9002 company
