M-7019R
8-channel Universal Analog Input Data Acquisition Module, supports current input, voltage input, and thermocouple input. Communicable over Modbus RTU, RS-485 and DCON protocol. Comes with free EZ Data Logger software for data logging. Supports operating temperatures between -25°C ~ +75°C (-13°F ~ +167°F).
Features
The M-7019 is a 8-channel Universal Analog Input Data Acquisition Module, supports current input, voltage input, and thermocouple input. Communicable over Modbus RTU, RS-485 and DCON protocol. It comes with free EZ Data Logger software for PC based data logging and monitoring systems. Supports operating temperatures between -25°C ~ +75°C (-13°F ~ +167°F). The ICP DAS M-7000 family of network data acquisition and control modules support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/HMI software and PLCs.
- Indication LED Light for power and communication
- Individual Channel Configurable
- Wire Opening Detection for Thermocouple
- Support Modbus and DCON Protocol
- Input Channels: 8 differential
- Communication Interface: RS-485
- Din Rail Mount
Specifications
Communication | ||
Interface | RS-485 | |
Bias Resistor | No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) | |
Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) | |
Baud Rate | 1200 to 115200 bps | |
Protocol | Modbus RTU, DCON | |
Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) | |
LED Indicator/Display | ||
System LED Indicator | Yes, 1 as Power/Communication Indicator | |
I/O LED Indicators | - | |
7-Segment LED Display | - | |
Isolation | ||
Intra-module Isolation, Field-to-Logic | 3000 VDC | |
EMS Protection | ||
ESD (IEC 61000-4-2) | ±4 kV | |
EFT (IEC 610004-4) | ±4 kV | |
Power | ||
Reverse Polarity Protection | Yes | |
Input Range | +10 ~ +30 VDC | |
Consumption | 1.2 W | |
Mechanical | ||
Dimensions (L x W x H) | 123 mm x 72 mm x 35 mm | |
Installation | DIN-Rail or Wall Mounting | |
Environment | ||
Operating Temperature | -25°C ~ +75°C (-13°F ~ +167°F) | |
Storage Temperature | -40°C ~ +85°C (-40°F ~ +185°F) | |
Humidity | 10 - 95% RH, Non-condensing |
I/O Specifications
Analaog Input | ||
Channels | 8 | |
Wiring | Differential | |
Sensor Types | Thermocouple | J, K, T, E, R, S, B, N, C, L, M, LDIN43710 |
Voltage | ±15 mV, ±50 mV, ±100 mV, ±150 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V | |
Current | ±20 mA, 0 ~ +20 mA, +4 ~ +20 mA (Jumper selectable) | |
Resolution | 16-bit | |
Accuracy | 0.1% of FSR | |
Sampling Rate | 8 Hz (Total) | |
Input Impedence | Voltage | 2 MΩ |
Current | 125 Ω | |
Thermocouple | > 400 kΩ | |
Common Voltage Protection | ±200 VDC | |
Individual Channel Configuration | Yes | |
Overvoltage Protection | 240 Vrms | |
Open Wire Detection (for thermocouple only) | Yes | |
Temperature Outputs Consistency | - | |
Stable Temperature Output in the Field | - |