Encoder-300
3-Axis Encoder Interface ISA Board, supports operating temperatures from 0 ~ +60 °C
Features
The ENCODER300 is a 3-axis quadrature encoder interface board for IBM PC/AT bus-compatible devices. Phase 0, phase 90 and index pulse inputs are provided for each encoder. Inputs may be single ended (A, B or C) or differential (A+, A-, B+, B-, C+ or C-). Power and ground connections are also provided for use by the encoder if needed. Inputs are conditioned by a four-stage digital fi lter, and the maximum input rate in quadrature decode mode is 1 MHz. The conditioned inputs are applied to a 16-bit counter, which may be used for quadrature decoding, pules or direction-input counting, or as a pulse input up/down counter.
- Accepts Inputs from Incremental or Quadrature Encoders
- 3 independent axes
- Max. Quadrature Input Frequency: 1 MHz
- Counts per Encoder Cycle: X1, X2, X4 (Software selectable)
- Encoder Input Modes: Quadrature , Up/Down , Pulse/Direction
Specifications
General | |
Number of Axis | 3 |
Slot Interface | ISA Bus |
Resolution | 16 bit |
Mode | Quadrant, CW_CCW, PULSE_DIR |
Maximum Counting Rate | 1 MHz |
Digital Output Channels | - |
I/O Isolation | - |
Connector | 25-pin D-Sub |
Power Consumption | +5 V @ 500 mA |
Environmental | |
Operating Temperature | 0 ~ +60 °C |
Storage Temperature | -20 ~ +80 °C |
Ambient Relative Humidity | 0 ~ 90 % RH, condensing |
Software Support | |
Windows Driver/DLL/Lib | Windows 95/98/ME/NT4.0 |
DOS Library | DOS 6.2 |
Labview Development Kit | - |
Linux Library | - |