I-7188XBD-CAN
I-7188 CAN bus series Programmable Automation Controller with 40 Mhz CPU. MiniOS7 Operating System. Supports operating temperatures between -25 to 75°C.
Features
The I-7188XBD-CAN series PACs (Programmable Automation Controller) are powered by 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port and RS-485 port. Uses can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the I-7188XBD-CAN series PACs have different I/O types for users to match their requirement. For I-7188XBD-CAN, it provides 1 open collector digital output channel and 1 digital input channel. It is useful for transfer the command from differential communication interface. Therefore, it can satisfy the applications with I/O demand. Therefore, the I-7188XBD-CAN series PACs are economic and convenient solution for diversification CAN application.
Application
- CAN bus communication application
- Industry automation
- Auto detecting CANopen slave devices
- IO monitor
- High speed data acquisition system
- Process monitor and control
- Factory automation
- Laboratory automation
- Communication switching
Features
- 2500Vrms photo-isolation protection.
- Compatible with CAN specification 2.0 parts A and B.
- Programmable transfer rate up to 1 Mbps.
- Jumper select 120Ω terminator resistor for CAN channel
- 64-bit hardware unique serial number inside
- COM driver support interrupt & 1K QUEUE input buffer
- COM port: COM1, COM2
- Built-in RTC, NVRAM, EEPROM
- One digital Input channel and one open collector output channel
- Built-in self-tuner ASIC controller on RS-485 port
- 7-segment LED display
- Built-in ICP DAS’s MiniOS7
- Program download port: COM1
Specifications
Hardware |
|
CPU |
80186, 40 MHz or compatible |
SRAM/Flash/EEPROM |
512 KB / 512 KB / 2 KB |
NVRAM |
31 bytes (battery backup, data valid for up to 10 years) |
RTC (Real Time Clock) |
Yes |
WDT(watchdog) |
CPU built-in |
Hardware Serial No. | 64-bit hardware serial No. |
ESD Protection |
4 kV class A. |
CAN Interfrace |
|
Controller | NXP SJA1000T with 16 MHz clock |
Transceiver | NXP 82C250 |
Channel Number | 1 |
Connector | 5-pin screwed terminal block (CAN_L, CAN_H, N/A for others) |
Baud Rate (bps) | 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate) |
Transmission Distance (m) | Depend on baud rate (for example, max. 1000 m at 50 kbps ) |
Isolation | 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor |
Jumper for 120 Ω terminator resistor |
Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B |
UART Interface |
|
COM 1 |
RS-485/RS-232 (can’t be used simultaneously) |
COM 1 Connector |
2-pin screwed terminal block (DATA+, DATA-) 5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND) |
COM 2 |
RS-485 (Self-turner inside) |
COM 2 Connector |
2-pin screwed terminal block (DATA+, DATA-) |
Transmission Distance (m) |
Depend on baud rate (for example, max. 1200 m at 9.6 kbps ) |
Baud Rate (bps) |
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
LED |
|
Round LED |
L1 LED, L2 LED, L3 LED |
5-digit 7 segment |
Yes |
Power |
|
Power Supply |
Unregulated +10 ~ +30 VDC |
Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
Power Consumption |
3 W |
Mechanism |
|
Installation | DIN-Rail |
Dimensions |
72mm x 33mm x 122mm (W x L x H) |
Environmental |
|
Operating Temperature |
-25°C ~ +75°C (-13°F ~ +167°F) |
Storage Temperature |
-40°C ~ +80°C (-40°F ~ +176°F) |
Ambient Relative Humidity |
5 ~ 95% RH, non-condensing |