PET-7H16M
Ethernet High Speed Data Acquisition Module with 8 x AI, 4 x DI, 4 x DO. Communicable over Modbus TCP and supports maximum sampling rate of 200 kHz per channel. Replacement for PET-7H16T.
Features
The PET-7H16M is an high speed data acquisition devices built-in a Ethernet communication port for data transfer over the network and it includes a high speed 16-bit single-ended analog inputs (200 KHz sample and hold for 8 channels), 4-channel digital inputs and 4-channel digital outputs. It provides programmable input range on all analog channels (±5 V and ±10 V), digital output can be set output with Short-circuit protection and overload protection. PET-7H16M also has qualification for 4 kV ESD protection as well as 2500 VDC intra module isolation.
-
8 Single-ended Analog Input Channels(16-bit Resolution)
- Supports real Sample and Hold
- Max. Sample Rate: 200 kS/s per channel
-
Built-in I/O
- AI: 8 Channels
- DI: 4 Channels
- DO: 4 Channels
Featured Modes
-
Data transmission mode
- Continuous transmission mode (Max. sampling rate of 30 kHz per channel)
- N data samples mode (Max. sampling rate of 200 kHz per channel)
-
A/D trigger mode
- Software AD Data Acquisition mode
- External Digital Signal Event Trigger mode
- External Clock AD Conversion Data Acquisition mode
-
External Digital Signal Event Trigger mode
- Pre-Trigger (acquisition of N data samples)
- Post-Trigger (acquisition of N data samples)
-
Software Support
- VC, C#, VB.NET API and Demo
- LabVIEW Toolkit and Demo
Specifications
Communication
Ethernet Port
1 x RJ-45, 10/100 Base-TX
PoE
Yes
Security
ID, Password and IP Filter
LED Indicators
for System Running
Yes
for Ethernet Link/Act
Yes
for PoE Power
Yes
2 Way Isolation
Ethernet
1500 VDC
I/O
2500 VDC
EMS Protection
ESD (IEC 61000-4-2)
4kV Contact for Each Terminal and 8kV Air for Random Point
EFT (IEC 61000-4-4)
+/-4 kV for Power
Power
Reverse Polarity Protection
Yes
Powered from Terminal Block
+12 ~ +48 VDC
Consumption
2.6 W (Max.)
Mechanical
Dimensions (W x L x H)
76 mm x 120 mm x 38 mm
Installation
DIN-Rail or Wall mounting
Environmental
Operating Temperature
-25 ~ +75 °C
Storage Temperature
-30~ +80 °C
Humidity
10 ~ 90% RH, non-condensing
I/O Specifications
Analog Input
Channels
8 Single-ended
Resolution
16-bit
Sampling Rate
200 kS/s (Each Channel)
Bipolar Input (Programmable)
+/- 10 V, +/- 5 V
FIFO Size
2 k Sample
Accuracy
0.05 % of FSR
AD Trigger Mode (Programmable)
Software/External clock trigger/Digital trigger (Post/Pre-trigger)
Digital Input
Channels
4
Contact
Wet Contact
Sink/Source (NPN/PNP)
Sink/Source
On Voltage Level
+5 VDC ~ 30 VDC
Off Voltage Level
1 VDC Max.
Digital Output
Channels
4
Type
Isolated Open Collector
Sink/Source(NPN/PNP)
Sink
Load Voltage
+5 VDC ~ 30 VDC
Load Current
100 mA
Short-circuit Protection
Yes
Overload Protection
1.3 A
External Clock Trigger/Digital Trigger
Trigger Pulse Width
1.5 µs Min.
Trigger Type
Falling Edge
On Voltage Level
+5 VDC ~ 5.5 VDC @ 15 mA
Off Voltage Level
< 0.8 VDC