| Low Cost DCS Application for Cement Plant Process Automation |
 I-7000
series remote data acquisition modules monitor temperature and current
of the oil system. The system may be turned on or off based on
conditions. I-7520 does the RS-232 to RS-485 data conversion. Touch 200 HMI is used with I-7188
to interface with the ball forming automation section. ICP DAS
products help save energy and reduce consumption. Click here to read the full application story.
|
| Unmanned Mountain Station Supervisory System |
 Each supervisory station controls a slave station. Data communication is carried out via microwave channels. I-7067 and I-7041 are used for acquiring alarm digital input and relay output. I-7188
transmits data steadily and and connects reliably. ICP DAS
products helped reduce development time and improve operations. Click here to read the full application story. | |
|
| Dear Maria, |
|
| I-7000 Data Acquisition Modules used for Water Treatment |
 I-7000 modules were used for monitoring and for data acquisition for a water treatment plant. With the I-7000 series
dual watchdogs, the system can operate more easily and reliably.
Five water pumps are used for importing muddy water into
the system. I-7052 and I-7067 are used to control the status of each pump. I-7017 acquires the voltage and current data from each pump. Click here to read the full application sotry.
|
| I-7000 Modules in Flammability Alert System |
 The flammability alert system described is typically used for the field monitoring and measurement necessary at petrochemical plants
to avoid serious accidents. Because the field environment is rather
harsh with heavy electromagnetic interference, the requirements for
reliability and stability for such measurement and control systems are
very high. The dual-watchdog features of the ICP DAS modules ensure
security for such systems. The I-7000 configuration software provides full support for various features of the I-7000 modules beneficial to the system reliability and safety. Click here to read the full application story.
|
| Voltage Monitoring System |
The
monitoring of voltages in electrical power stations is essential for
the evaluation of the quality at different levels of the electric
network. The data acquired in real-time is stored in the
EPROM. I-7017 uses RS-485 to distribute signals to the PC. Each I-7017 module has an internal hardware watch dog so if the module is down, it can reboot in nearly no time. Click here to read the full application story. | |
The remote dispatching system in a thermoelectric plant operates
under harsh environmental conditions with severe interference and
scattered parameters; therefore, the monitoring system must be reliable
with robust real-time performance. I-7000
modules improve production efficiency and reduce cost by enhancing
dispatching and management. They are easy to add into existing
systems. Click here to read the full application story.
