| Serial to Ethernet and Modbus RTU to Modbus TCP Converters |

ICP DAS USA Serial to Ethernet and Modbus RTU to Modbus TCP Converters allow you to have your devices communicate across protocols. We offer Programmable 40 Mhz CPU 10 Base T Ethernet converters, Programmable 80 Mhz CPU 10/100 Base T Ethernet converters, Non-Programmable PoE 10/100 Base TX converters, and Non-Programmable PoE 10/100 Base TX Modbus RTU to Modbus TCP converters.
All Products
|
|
| USB Converters |

ICP DAS USA provides USB Converters that function as signal conversion from USB to RS-232/422/485 or CAN industrial data communication. We also provide Industrial USB Hubs. Our USB converters are made of Fire Retardant Materials (UL94-V0 Level).
All Products
|
|
|
|
|
| Industrial Unmanaged Ethernet Switches |

ICP DAS offers a large selection of unmanaged Ethernet switches, in both metal and plastic form factors; offering users cost effective solutions for implementing industrial control or data acquisition over a local area network!
All Products
|
|
|
| J1939 to Modbus RTU Converters |

These products provide a industrial data communication transformation between J1939 protocol and Modbus RTU protocol. We provide Utility software for users to configure the parameters of J1939 / Modbus RTU of GW-7228. The application fields can be Diesel power-train applications, In-Vehicle networks for trucks and buses, etc.
All Products
|
|
| Industrial Managed Fiber Optic Switches |

Industrial Ethernet Layer 2 Managed Switches that secures data transmission by using fiber optics transmission to provide immunity from EMI/RFI interference. They are the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.
All Products
|
|
|
| Industrial Unmanaged Fiber Optic Switches |

ICP DAS offers a broad range of fiber optic to ethernet converters, in both metal and plastic form factors; as well as multitude of configurations. All converters are capable of 10/100 BaseT and 10/100 BaseFX communication.
All Products
|
|
| CAN Communication Converters |

The Controller Area Network (CAN) is a serial communication protocol, which efficiently supports distributed real-time control with a very high level of security. It provides the error process mechanisms and message priority concepts. These features can improve the network reliability and transmission efficiency. Furthermore, CAN supplies the multi-master capabilities, and is especially suited for networking intelligent devices as well as sensors and actuators within a system or sub-system.
ICP DAS USA provides CAN Communication Converters for converting one type of signal into another. We offer many types of CAN Converters including: CAN to Ethernet, CAN to Fiber, CAN to Modbus RTU, CAN to RS-232, CAN to RS-485, J1939 to Modbus RTU, CAN to Modbus TCP and more.
All Products
|
|
|
| Industrial Managed Ethernet Switches |

ICP DAS USA provides managed Ethernet Switches for your industrial data communication needs. Our switches detect and recovers from a fiber or copper link failure within approximately 50ms which helps applications achieve a seamless process.
All Products
|
|
| Modbus Converters |

Our Modbus Converters convert Modbus to different protocols to bring you flexibility for your applications. Intelligent Modbus RTU to Modbus TCP converter. Our Modbus converters allow communication from Modbus to CANopen, Profibus, DeviceNet, and J1939.
All Products
|
|
|
| DeviceNet Gateway |

DeviceNet is a low level network that provides connections between simple industrial devices (like sensors and actuators) and higher level devices (like controllers). DeviceNet has Master/Slave and Peer to Peer capabilities. DeviceNet Gateway is capable of brokering communication between DeviceNet protocol hardware, and ICP DAS DCON protocol hardware.
All Products
|
|
| Profibus Gateway |

PROFIBUS (PROCESS FIELD BUS) which is anchored in the international standards IEC 61158 and IEC 61784 is an open, digital communication system with a wide range of applications. It is particularly used in the fields of factory and process automation. It is suitable for both fast, time-critical applications and complex communication tasks.
To utilize this powerful communication system more easily, ICP DAS provides PROFIBUS DP products. We have been developing and studying PROFIBUS DP for many years. ICP DAS will always secure your industrial safety and stable automation systems as our mission.
All Products
|
|
|
| FR-Net Communication Boards |

FRnet is an innovative industrial field bus offering high-speed deterministic I/O control, real I/O synchronization capabilities, non-protocol communication, and easy programming. The ICP DAS FRnet line of products offers cutting edge technology for high speed data acquisition applications!
All Products
|
|
| CANbus Communication Boards |

CANbus (Controller Area Network) Communication Boards are for serial communication protocol, and efficiently support distributed real-time control with a very high level of security. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted.
All Products
|
|
|
| Remote Maintenance Devices |

ICP DAS USA conveniently offers remote maintenance devices so you can maintain your devices remotely. Two major networking technologies are utilized: Voice streaming and Pair connections. Pair connection means the user can operate remote COM port devices via Ethernet TCP/IP protocol just like a local COM port. Voice streaming means the user can talk to remote operators while operating remote COM-linked devices.
All Products
|
|
| BACnet Converters |

BACnet is a communications protocol for building automation and control networks. It is an ASHRAE, ANSI, and ISO standard protocol. BACnet was designed to allow communication of building automation and control systems for applications such as heating, ventilating, and air-conditioning control, lighting control, access control, and fire detection systems and their associated equipment. The BACnet protocol provides mechanisms for computerized building automation devices to exchange information, regardless of the particular building service they perform.
BACnet Features
- Designed specifically for building automation control
- Conformance to ANSI/ASHRAE Standard 135-2008 or ISO 16484-5
- A completely non-proprietary open communication software standard
- Support several different physical and link layers (BACnet/IP, Ethernet, ARCNET, MS/TP, PTP and LonTalk)
- All data in a BACnet system is represented in terms of "objects", "properties" and "services"
- Scalability and choice of compatibility with other systems and vendors
All Products
|
|
|
| Ethernet/IP to Modbus Gateways |

Our robust Ethernet/IP to Modbus Gatways are helpful for data-exchanging between the Modbus RTU network and the EtherNet/IP network. They read the register data from the Modbus RTU slaves and publish this data to the input register data of the EtherNet/IP scanner.
All Products
|
|
|
|
| Industrial Wireless ZigBee |

ZigBee is a specification based on the IEEE 802.15.4 standard for wireless personal area networks (WPANs). ZigBee operates in the ISM radio bands and is a general-purpose, inexpensive, self-organizing, mesh network that can be used for industrial control, embedded sensing, medical data collection, smoke and intruder warning, building automation, home automation, and domotics. There are three different types of ZigBee devices in a ZigBee network: Master, Router / Repeater and End Device.
All Products
|
|
|
|
|
|
|